Clarion dxz738rmp Adjusting the balance, Adjusting the bass Gain Frequency, Q-curve

Basic Operations

Adjusting the tone	Adjusting the treble (Gain,
Press the [A-M] button and select the item to	Frequency)
adjust. Each time you press the [A-M] button,	This adjustment can be performed when the Z-
the item changes as following order:
	Enhancer Plus is set to “CUSTOM”.
●When “B-BOOST” is set
	1. Press the [A-M] button and select “TREBLE”.
“SW-VOL 0” ➜ “B-BOOST” ➜ “BAL 0” ➜
	2. Turning the [ROTARY] knob clockwise em-
“FADER 0” ➜ Last function mode.
	phasizes the treble; turning it counterclock-
●When “IMPACT” is set
	wise attenuates the treble.
“SW-VOL 0” ➜ “IMPACT” ➜ “BAL 0” ➜	∗ The factory default setting is “TÅGAIN 0Δ.
“FADER 0” ➜ Last function mode.	(Adjustment range: –6 to +6)
●When “EXCITE” is set	3. Press the [d] or [a] button to select
“SW-VOL 0” ➜ “EXCITE” ➜ “BAL 0” ➜	“TÅFREQ 12kΔ.
	Turninng the [ROTARY] knob clockwise or
“FADER 0” ➜ Last function mode.
●When “CUSTOM” is set	counterclockwise to select the frequency.
	∗ The factory default setting is “TÅFREQ 12kΔ.
“SW-VOL 0” ➜ “BASS” ➜ “TREBLE” ➜
	(Adjustment 8 kHz/12 kHz)
“BAL 0” ➜ “FADER 0” ➜ Last function
	4. When the adjustment is complete, press the
mode.
	[A-M] button several times until the function
●When “Z+ OFF” is set
	mode is reached.
“SW-VOL 0” ➜ “BAL 0” ➜ “FADER 0” ➜
Last function mode.	Adjusting the balance

English

Adjusting the bass (Gain,

Frequency, Q-curve)

This adjustment can be performed when the Z- Enhancer Plus is set to “CUSTOM”.

1.Press the [A-M] button and select “BASS”.

2.Turning the [ROTARY] knob clockwise em- phasizes the bass; turning it counterclock- wise attenuates the bass.

∗The factory default setting is “BÅGAIN 0Δ. (Adjustment range: –6 to +8)

1.Press the [A-M] button and select “BAL 0”.

2.Turning the [ROTARY] knob clockwise em- phasizes the sound from the right speaker; turning it counterclockwise emphasizes the sound from the left speaker.

∗The factory default setting is “BAL 0”. (Adjust- ment range: L13 to R13)

3.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

3.Press the [d] or [a] button to select “BÅFREQ 50Δ.

Turninng the [ROTARY] knob clockwise or counterclockwise to select the frequency.

∗The factory default setting is “BÅFREQ 50Δ.(Adjustment 50/80/120 Hz)

4.Press the [d] or [a] button to select “BÅQ 1Δ.

Turninng the [ROTARY] knob clockwise or counterclockwise to select the Q-curve.

∗The factory default setting is “BÅQ 1Δ. (Ad- justment 1/1.25/1.5/2)

5.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

Adjusting the fader

1.Press the [A-M] button and select “FADER 0”.

2.Turning the [ROTARY] knob clockwise em- phasizes the sound from the front speakers; turning it counterclockwise emphasizes the sound from the rear speakers.

∗The factory default setting is “FADER 0”. (Ad- justment range: F12 to R12)

3.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

DXZ738RMP 13