Clarion DXZ925 Basic Operations, Adjusting the balance, Adjusting the fader, Operation BASS/TREB

Basic Operations

English

Adjusting the balance

1.Press the [A-M] button and select “BAL- ANCE”.

2.Turning the [ROTARY] knob clockwise em- phasizes the sound from the right speaker; turning it counterclockwise emphasizes the sound from the left speaker.

∗The factory default setting is “0”. (Adjustment range: L13 to R13)

3.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

Adjusting the fader

1.Press the [A-M] button and select “FADER”.

2.Turning the [ROTARY] knob clockwise em- phasizes the sound from the front speakers; turning it counterclockwise emphasizes the sound from the rear speakers.

channel (subwoofer).

If you using Dolby Pro Logic source and your speaker is only four Front L.R. + Surround L.R., speaker setting will be better to CTR+SW and CTR OFF, so Center channel divided to Front L.R. automatically.

Note

•When SW-L + SW-R are chosen, audio output from SW-L is not available in the PL II mode.

●AC-Processor II

Front L.R. + Rear L.R.+ Sub Woofer L.R. (4ch + 2ch)

To make the most of the sound field reproduc- tion of AC-Processor II, a speaker system of 4 channel + 2 channel is recommendable.

1.Press and hold the [TITLE] button for 1 sec- ond or longer and enter “ADJ” mode.

2.Press the [a] or [d] button to select the “SP-SETTING”.

∗ The factory default setting is “0”. (Adjustment	3. Turn the [ROTARY] knob clockwise or coun-
	terclockwise to select “SW L+SW R” or “CTR
range: F12 to R12)
3. When the adjustment is complete, press the	+SW” mode.
	Note:
[A-M] button several times until the function
mode is reached.	• When CTR + SW are chosen, audio output from
	CTR is not available except in the PL II mode.

Operation BASS/TREB

1.Press the “BASS/TREB” mode. Each time the [EQ] button is pressed, the adjusting item “BASS” or “TREB” is changed cyclically.

2.Turn the [ROTARY] knob clockwise or coun- terclockwise to adjust “BAS/TREB”.

3.Press the [EQ] button to return to the previ- ous mode.

∗The Adjustment range is from -6dB to +6dB for bass and treb.

∗This parameter is reflected STD PRO mode

Speaker Setting

You can set up your favorite sound environment using “Dolby Surround Pro logic II” or “AC- Processor II” so that you can enjoy a dynamic sound of 5.1 ch surround or 4ch + 2ch speaker.

●Dolby Pro Logic II 5.1ch surround

Center SP +Front L.R. +Surround L.R. +Sub

Woofer.

To make the most of the sound field reproduc- tion of Dolby Pro Logic II, a speaker system of

5.1channel is recommendable. It has been also designed so that a sound filed effect almost as good as that of 5.1 channel reproduction can be obtained even by a constitution of 4 channel + 1

Center Speaker and Sub Woofer On / Off

Select PLII Mode on and SP setting to “CTR+SW” mode

1.Press and hold the [TITLE] button for 1 sec- ond or longer.

2.Press the [a] or [d] button to select the “SP SEL”.

3.Press the [ ] button to adjust the “CTR- SP” “SUB W”.

4.Turn the [ROTARY] knob clockwise or coun- terclockwise to select “ON” or “OFF”.

∗This function is useful for Speaker Setting Problems.

Filter Adjustment

1.Select Dolby Pro Logic II or AC-ProIImode and press and hold the [TITLE] button for 1 second or longer.

2.Press the [a] or [d] button to select the “FILTER”.

3.Press the [ ] button to adjust the “SUB-W LPF” or “HPF”.

4.Turn the [ROTARY] knob clockwise or coun- terclockwise to adjust filter frequency.

14 DXZ925