Clarion DXZ925 owner manual Digital Radio / DAB Operations, Switching the PTY display language

Digital Radio / DAB Operations

INFORMATION item

ENGLISH	Contents
TRAVEL	Transport flash
WARNING	Warning / Service
NEWS	News flash
WEATHER	Area weather flash
EVENT	Event announcement
SPECIAL	Special event

1.Perform the following operation depending on the connected model.

Press and hold the [TITLE] button for 1 second or longer.

2.Press the [a] or [d] button to select “INFO

SEL”, then press the [ ] button to enter “INFO SEL” mode.

3.Press the [a] or [d] button to select an in- formation item. You can select any of 6 items:

4.Perform the following operation depending on the connected model.

●Setting TA standby mode

If you press the [ISR] button when only “TP” is lit in the display, “TP” and “TA” light in the display and the unit is set into TA standby mode until a traffic announcement is broadcast. When a traf- fic announcement broadcast starts, “TRA INFO” appears in the display. If you press the [ISR] but- ton while a traffic announcement broadcast is being received, the traffic announcement broad- cast reception is cancelled and the unit goes into TA standby mode.

●Cancelling TA standby mode

With “TP” and “TA” lit in the display, press the

[ISR] button. The “TA” in the display goes off and TA standby mode is cancelled.

∗If “TP” is not lit, pressing [ISR] button searches for a TP station.

●Searching for a TP station

When “TP” is not lit, if you press the [ISR] but- ton, “TA” in the display lights and the unit auto- matically receives a TP station.

Note:

English

Turn the [ROTARY] knob clockwise or counterclock wise to set the information item for ON or OFF.

5.Press the [TITLE] button to return to the pre- vious display.

Switching the PTY display language

You can select one of 2 languages (English or French) for the PTY displayed in the display.

∗The factory default setting is “ENGLISH”.

1.Press and hold the [TITLE] button for 1 sec- ond or longer to switch to the adjustment se- lection display.

2.Press the [a] or [d] button and select “LANGUAGE”.

3.Turn the [ROTARY] knob clockwise or coun- terclockwise to select the desired language.

4.Press the [TITLE] button to return to the pre- vious mode.

TA (Traffic Announcement)

In the TA standby mode, when a traffic announce- ment broadcast starts, the traffic announcement broadcast is received as top priority regardless of the function mode. Traffic programme (TP) auto- matic tuning is also possible.

∗This function can only be used when “TP” is lit in the display. When “TP” is lit, this means that the DAB broadcast station being received has traffic announcement programmes.

•If a TP station is not received, the unit continues the search operation. Pressing the [ISR] button again goes off “TA” in the display and stops TP station searching.

Auto store function for TP stations

You can automatically store up to 6 TP stations into preset memory. If the number of TP that can be received is less than 6, broadcast stations al- ready stored in memory are left without being overwritten.

With “TA” lit in the display, press and hold the

[SC] button for 2 seconds or longer. The TP sta- tions with the good reception sensitivity are stored into preset memory.

∗Even if you select FM1 or FM2, a TP station is stored into memory for FM3.

DXZ925 29