Clarion DXZ925 owner manual Operations Common to Each Mode Beep, AUX function, Displaying titles

Beep

1.Press the [TITLE] button for 1 second or longer to enter ADJ mode.

2.Press the [a] or [d] button to select the “BEEP”.

3.Turn the [ROTARY] knob clockwise or coun- terclockwise to switch Beep on or Beep off.

4.Press the [TITLE] button to return to the pre- vious mode.

∗ Factory default setting is Beep on.

AUX function

This system has an external RCA input so you can listen to sounds and music from external devices connected to this unit.

4.Turn the [ROTARY] knob clockwise or coun- terclockwise to select AUTO SS type or AUTO SS off.

5.Press the [TITLE] button to return to the pre- vious mode.

SS type are SS OFF, SS PTN1, SS PTN2,

SS PTN3, SS RANDOM

Displaying titles

This unit can display title data and user title data input with this unit.

1.Press the [DISP] button to display the title.

2.Each time you press and hold the [DISP] but- ton for 1 second or longer, the title display changes.

Note:

English

Selecting AUX IN sensitivity

Make the following settings to select the sensi- tivity when sounds from external devices con- nected to this unit are difficult to hear even after adjusting the volume.

∗The factory default setting is “SENS LOW”.

1.Press and hold the [TITLE] button for 1 sec- ond or longer to set the Adjust mode.

2.Press the [a] or [d] button and select “AUX SENS”.

3.Turn the [ROTARY] knob clockwise or coun- terclockwise as needed and select from “SENS HIGH”, “SENS MID” or “SENS LOW”.

4.Press the [TITLE] button to return to the pre- vious mode.

Screen saver function

This unit is provided with the screen saver func- tion which allows you to show various kinds of patterns and characters in the Operation Status indication area of the display. You can turn on and off this function.

If the button operation is performed with the screen saver function on, the operation display corresponding to the button operation is shown for about 30 seconds and the display returns to the screen saver display.

∗The factory default setting is “RANDOM”.

1.Press the [TITLE] button for 1 second or longer to enter ADJ mode.

2.Press the [a] or [d] button to select the “AUTO SS”.

The contents of the title to be displayed depend on a disc to be played.

If a disc with no title or user title input is played, “NO-TITLE“ appears in the display.

Setting the method for Ttitle scroll

Set how to scroll in CD-TEXT or MD.

∗The factory default setting is “ON”.

1.Press and hold the [TITLE] button for 1 sec- ond or longer to set the Adjust mode.

2.Press the [a] or [d] button and select “AUTO SCROLL”.

3.Turn the [ROTARY] knob clockwise or coun- terclockwise and select “ON” or “OFF”.

● “SCROLL ON”

To scroll automatically.

●“SCROLL OFF”

To scroll just 1 time when the title was changed or the title key was pressed.

4.Press the [TITLE] button to return to the pre- vious mode.