Clarion ARX4570 owner manual Especificaciones

× 4 canales)

ARX4570 Cover+P45 99.3.4 1:10 PM Page 3

2. CONTROLS / COMMANDES / CONTROLES

3. CASSETTE PRECAUTIONS AND CARE

9. ESPECIFICACIONES

Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.

Remarque: Veuillez déployer cette page et vous référer aux schémas quand v ous lisez chaque chapitre.

Nota: Cuando lea los capítulos, despliegue esta página y consulte los diagramas.

SOURCE UNIT / APPAREIL PILOTE / UNIDAD FUENTE

		Cassette Insertion Slot
1 2 345	6	Fente d’insertion de la cassette	7
		Ranura de inserción de casete

English

English

1.Tape slack can lead to operating difficulties. Remove tape slack before inserting a cas- sette, particularly when using C-90 or prere- corded cassettes.

2.Use C-30 to C-90 cassettes. Avoid use of C-120 or longer cassettes (The very thin tape may stretch or break).

3.Clean the head periodically with a good com- mercial head cleaner. Avoid touching the head with magnetic or hard objects.

4.Do not oil the cassette mechanism.

5.Always remove the cassette from the mecha- nism when not in use. Exposure to direct sun- light, extreme temperatures or high humidity may damage cassettes.

6.The cassette tape will automatically eject from the mechanism if it is damaged. Always ensure that cassette tapes are in good condi- tion prior to use.

Sintonizador FM	General
Margen de frecuencias	Tensión de alimentación
…… 87,9 MHz a 107,9 MHz	…… 14,4 V CC (10,8 a 15,6 V permisible)
Sensibilidad utilizable……11 dBf	Consumo……Menos de 10 A
Sensibilidad de silenciamiento 50 dB	Impedancia del altavoz
…… 17 dBf	…… 4 Ω (4 Ω a 8 Ω permisible)
Selectividad de canal alterno……75 dB	Peso……3,52 lb . (1,6 kg)
Separación estereofónica (1 kHz)……35 dB	Dimensiones
Respuesta en frecuencia (±3 dB)	…… 7" (178 mm) Ancho × 2" (50 mm) Alto ×
…… 30 Hz a 15 kHz	6-3/32"(155 mm) Profundo
	7"	2"
	(178 mm)	(50 mm)

Sintonizador AM

1	2	3	4	5	6
) ( * & ´ % $ # @ 0 9 8
					!

4. DCP (Detachable Control Panel)

The control panel can be detached to prevent	Storing the DCP in the DCP Case
theft. When detaching the control panel, store it	Hold the DCP, in the orientation as shown in the
in the included DCP case to prevent scratches.
	figure below, and put it into the supplied DCP
We recommend taking the control panel with you
	case. (Ensure the DCP is in the correct orienta-
when leaving the car.
	tion.)

Margen de frecuencias

……530 kHz a 1.710 kHz

Sensibilidad utilizable……25 µV

Cassette

Lloro y trémolo (WRMS)……0,06%

Separación de canales (1 kHz)……45 dB

Relación señal/r uido

6-3/32"	(155 mm)
3/4"	mm)(19	7-3/8"	2-1/4"
		(188 mm)	(58 mm)

Notas:

Français	DISPLAY
	AFFICHEUR
	VISUALIZADOR

Removing the DCP

1.Turn off the power.

2.Press the DCP Release button 1 .

……70 µs (CrO2, FeCr, Metal):

58 dB

Respuesta en frecuencia (± 3 dB)

120 µs (normal)……30 Hz a 18 kHz

70 µs ((CrO2, FeCr, Metal)……30 Hz a 20 kHz

•Las especificaciones se adecúan a las normas EIA.

•Con el propósito de introducir mejoras, las especifi- caciones y el diseño del producto están sujetos a cambios sin previo aviso.

Español

*The DCP is unlocked.

3.Remove the DCP.

Attaching the DCP

Insert the DCP into the right side of the source unit and press the left side to lock it.

CAUTION

Do not insert the DCP from the left side. Doing so may damage it.

CAUTION

•The DCP can easily be damaged by shocks. After removing it, place it in its case and be careful not to drop it or subject it to strong shocks.

•When the release button is pressed and the DCP is unlocked, the car’s vibrations may cause it to fall. To prevent damage to the DCP, always store it in its case after detaching it.

•The connector connecting the source unit and the DCP is an extremely important part. Be careful not to damage it by pressing on it with fingernails, pens, screwdrivers, etc.

DCP Rear Panel Source Unit Front

DCP connector

Source unit connector

Note:

•If the DCP is dirty, wipe off with a soft, dry cloth.

Amplificador de Potencia

Potencia máxima……140 W (35 W

Potencia media continua

……14 W × 4, en 4 Ω , 20 Hz a 20 kHz, 1%

THD

Preamplificador

Acción de control de bajos (30 Hz)……	±15 dB
Acción de control de agudos (10 kHz)……	±10 dB

Salida de línea (con CA, 1 kHz, 10 KΩ )…0,7 V

Español

3

280-7282-00

4

45