Indicator / Control panel
●When pressing 1, 2, 3 buttons, the control panel guide appears on the right side of the screen for 3 seconds to highlight the pressed button.
1
2
3
4 |
|
|
|
|
|
|
5 | 6 | 7 | ||||
Rear side of the TV
1Input mode selection
●Press repeatedly until you reach the desired mode.
[Main Menu]
●Press and hold for about 3 seconds to display main menu.
OK (when in the menu system)
Using the On Screen Displays - Operation guide
2Channel Up / Down
Cursor Up / Down (when in the menu system)
3Volume Up / Down
Cursor Left / Right (when in the menu system)
4Mains power On / Off switch
●Use to switch the mains power.
5Remote control signal receiver
●Do not place any objects between the TV remote control signal receiver and remote control.
6Ambient sensor
●Senses brightness to adjust picture quality when [Ambient Sensor] in the Picture Menu is set to [On].
7Power LED
Red: Standby
Green: On
●The LED blinks when the TV receives a command from the remote control.
Many features available on this TV can be accessed via the On Screen Display menu.
■Operation guide
Operation guide will help your operation by using the remote control.
Example: [Sound Menu]
Main Menu |
| 1/2 |
|
|
|
Picture | Mode | Standard |
Bass | 0 | |
Sound | Treble | 0 |
Equaliser |
| |
Network | Balance | 0 |
Surround | Off | |
Timer | Bass Boost | Off |
Digital Remaster | Off | |
Setup | Auto Gain Control | Off |
Volume Correction | 0 | |
Help |
|
|
|
|
|
Select | Selects your favourite sound | Page up |
| |
Change |
| |||
mode. |
| |||
Page down |
| |||
| RETURN |
| ||
|
|
|
| |
|
|
|
|
|
■How to use remote control
Open the main menu
Move the cursor / select from a range of options / select the menu item (up and down only) / adjust levels (left and right only)
Access the menu / store settings after adjustments have been made or options have been set
Return to the previous menu
Exit the menu system and return to [Home Screen]
Operation guide
n
13
7/9/2013 2:56:31 PM