Connections
●External equipment and cables shown are not supplied with this TV.
●Ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads.
●Check the type of terminals and cable plugs are correct when connecting.
●Always use a fully wired HDMI cable.
●Keep the TV away from electronic equipment (video equipment, etc.) or equipment with an infrared sensor. Otherwise, distortion of image / sound may occur or operation of other equipment may be interfered.
●Also read the manual of the equipment being connected.
Terminals
1
2 
3 
4
1SD Card slot
2USB 1 - 3 port
3HDMI1 - 3 
(p. 8, 9)
4DIGITAL AUDIO OUT
5AV (COMPONENT / VIDEO) 
(p. 9)
6Aerial terminal 
(see below)
7ETHERNET 
(p. 8)
7 | 6 | 5 |
Basic connections
Mains lead and aerial
■ TV | Aerial |
Mains lead (supplied)
AC
RF cable
■Mains lead
Insert the mains plug firmly into place.
●When disconnecting the mains lead, be absolutely sure to disconnect the mains plug at the socket outlet first.
●Keep RF (aerial) cable away from the mains lead to avoid and minimise mains interference pickup. ●Do not place the RF cable under the TV.
●An aerial, correct cable (75 Ω coaxial) and correct terminating plug are required to obtain optimum quality picture and sound.
●If a communal aerial system is used, you may require the correct connection cable and plug between the wall aerial socket and the TV.
●Your local Television Service Centre or dealer may be able to assist you in obtaining the correct aerial system for your particular area and the accessories required.
●Any matters regarding aerial installation, upgrading of existing systems or accessories required, and the costs incurred, are the responsibility of you, the customer.
7
7/9/2013 2:56:29 PM