Panasonic TH-L55DT60Q Assembling / Removing the pedestal, Removing the pedestal from the TV

Assembling / Removing the pedestal

Assembly screw (4)	Bracket	Cover
M5 × 16
Assembly screw (4)	Base	Cable clamp (4) (p. 10)
M4 × 10

C

●

●

●

●

●

●

■Assembling the pedestal

	A
1	C
	D

2

■Adjusting the panel to your desired angle

3

E

B

●Do not place any objects within the full rotation range.

15°

15°

(View from the top)

Secure the base as shown below to prevent the TV from falling over.

●The place where the base is secured should be thick enough and made of hard material.

Commercially available screw (not supplied)

Diameter: 3 mm

Length: 25 - 30 mm

Removing the pedestal from the TV

Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.

1 Remove the assembly screws from the cover.

2 Pull out the cover.

3 Lift the TV from the pedestal.

4 Remove the assembly screws from the bracket.

6

A 5

●

●

●

●

●

●

TH-L55DT60Q_EN.indd 6

7/9/2013 2:56:28 PM