Sharp HT-DD5000 operation manual Sound Control, Front speaker selector, Volume, Muting

(Continued)

SPEAKERS

A B

OFF ON

■Front speaker selector

●Select the front speakers you want to use.

●Before selecting the switches, be sure to set the VOL- UME control to 0.

To listen using the "A" speakers:

Set the SPEAKERS A button to ON.

●Sound will also be heard from the center, sub woofer and surround speakers.

To listen using the "B" speakers:

Set the SPEAKERS B button to ON.

●No sound will be heard from the center, sub woofer or surround speakers.

To listen using both the "A" and "B" speakers:

Set the SPEAKERS A and B buttons to ON.

To stop the sound from all of the speakers: Set the SPEAKERS A and B buttons to OFF.

●To use headphones, set both buttons to OFF.

Note:

●If either pair of the speakers, A or B, are connected to this unit, when both the SPEAKER A and B buttons are select to ON, no sound will be heard from the front speak- ers. Set the button for the speakers which you have con- nected to this unit to ON.

SOUND CONTROL

(Main unit)	(Remote control)
VOLUME	VOLUME

0 1 2 79 80

MUTE

■Volume

(Main unit operation)

When the VOLUME control is held in the + position, the volume will increase. When it is held in the − position, the volume will decrease.

(Remote control operation)

Press the VOLUMEbutton to increase the volume and

the VOLUMEbutton to decrease the volume.

Note:

If you were listening at a volume of "71" or louder before turning the power off, when the power is turned on next time, the volume will be set back automatically to "70".

■Muting

(Remote control operation)

Press the MUTE button to mute the sound immediately. "MUTE" will flash.

Press the MUTE button again to switch the sound back up to its previous volume level.

11

HT-DD5000(SEC) TINSE0009SJZZ