Sharp HT-DD5000 operation manual Antenna connection, Connecting the AC power cord

Page 8

(Continued)

 

 

 

1

2

3

 

 

AM loop

 

 

 

antenna

 

FM antenna

1

2

3

 

Outdoor

49 feet (15 m)

Outdoor AM

FM antenna

 

 

antenna

 

 

 

25 feet (7.5 m)

 

 

Ground rod

75 ohm coaxial

 

 

 

cable

 

 

 

 

 

 

Ground wire

AC OUTLET

AC 120 V, 60 Hz

To an AC

outlet

Antenna connection

Supplied FM antenna

Connect the FM antenna wire to the FM 75 OHMS terminal and position the FM antenna wire in the direction where the strongest signal can be received.

Supplied AM loop antenna

Connect the AM loop antenna wire to the AM and GND terminals. Position the AM loop antenna for optimum recep- tion.

Place the AM loop antenna on a shelf, etc., or attach it to a stand or wall with screws (not supplied).

Notes:

If you still hear static even after adjusting the position of the AM loop antenna, try reversing the wires or turn off the power to any external unit not in use.

Do not place the antenna wires on the unit. It may result in noise generation, since the unit is equipped with digital electronics.

Place the AM loop antenna and the FM antenna wire away from the unit for better reception.

If the antenna wires are placed near the AC power cord, they may cause interference.

Outdoor FM antenna

Use an outdoor FM antenna (75 ohm coaxial cable) if you require better reception.

Consult your dealer.

Note:

When an outdoor FM antenna is used, disconnect the sup- plied FM antenna wire from the FM 75 OHMS terminal.

Outdoor AM antenna

Use an outdoor AM antenna if you need better reception. Consult your dealer.

Note:

When using an outdoor AM antenna, be sure to keep the wire of the AM loop antenna connected.

Connecting the AC power cord

After connecting the speakers and antennas, plug the AC power cord into a convenient AC outlet.

Note:

Unplug the AC power cord from the AC outlet if the unit will not be in use for a prolonged period of time.

Unswitched AC Outlet

Used to plug in the AC power plug from other equipment. The power consumption of any units connected to this outlet should not exceed a total of 120 W. The power to any equip- ment connected to this outlet is not switched by the POWER switch on the HT-DD5000.

7

HT-DD5000(SEC) TINSE0009SJZZ

Image 8
Contents HT-DD5000 Important Safeguards U T I O NPrecautions ContentsAccessories Preparation for USE Speaker connectionFront speakers Center speakerSub woofer Surround speakersPlacing the speakers To mount the surround speakers on the wallIf color variations occur If the color variation is still presentABC Remote controlPrecautions for battery use Connecting the AC power cord Antenna connectionWhen connecting the unit to a DVD player External Unit ConnectionCords required to connect an external unit Cord included with this unit Optional cordWhen connecting the unit to a VCR or a camcorder When connecting the unit to a tape deck or an MD deckHow to switch audio signals and video sig- nals How to turn the power on or offVolume Sound ControlFront speaker selector MutingMain unit/remote control operation Extra bass X-BASSPre-programmed equalizer Sub woofer output levelTo listen to a disc using the Dolby Digital mode Type of Dolby digital signalDolby Digital Display Channels availableNORMAL/PHANTOM/WIDE mode Normal mode/Wide modePhantom mode To listen to Normal/Phantom/Wide modePreset balance Remote control operationSeconds SET UPSpeaker size setting Speaker delay setting To balance the front speakers Front speaker balance adjustmentSpeaker level setting Test tone Frnt Center Surr WooferDynamic range setting Tuning Manual tuningAuto tuning Radio OperationPreset tuning Preset memory scanHOW to USE the BUILT-IN Timer Timer playbackTo cancel the timer operation To resume timer playbackHeadphones To cancel the sleep operationSleep operation To check the remaining sleep timeDescription of Terminology External care MaintenanceSpecifications Consumer Limited Warranty

HT-DD5000 specifications

The Sharp HT-DD5000 is an impressive home theater system that delivers exceptional sound quality and versatility, making it a favorite among audiophiles and casual listeners alike. This system is designed to provide an immersive audio experience, enhancing your home entertainment whether you're watching movies, playing video games, or listening to music.

One of the standout features of the HT-DD5000 is its powerful 5.1 channel surround sound system. This includes five satellite speakers and a booming subwoofer, ensuring rich and accurate sound reproduction. The 360-watt total power output provides enough volume to fill any room, allowing users to enjoy crystal-clear dialogues and explosive sound effects.

The HT-DD5000 incorporates advanced audio technologies, such as Dolby Digital and DTS Surround, which help transform ordinary sound into a cinematic experience. With these technologies, the system can decode various audio formats, delivering dynamic three-dimensional soundscapes that keep users fully engaged. The built-in equalizer offers multiple sound presets, allowing users to tailor the audio output to their preferences, whether it be for music, movies, or gaming.

In terms of connectivity, the HT-DD5000 is equipped with several inputs and outputs, making it easy to integrate with other devices. It features multiple HDMI ports, allowing for high-definition video and audio to be transmitted without degradation. Additionally, it supports optical and coaxial digital inputs, enhancing the connection to TVs and gaming consoles, while also accommodating traditional analog inputs for older devices.

The system also supports USB connectivity, enabling users to play audio files directly from USB flash drives. For added convenience, the HT-DD5000 is compatible with Bluetooth technology, allowing for seamless wireless streaming from smartphones and tablets. This makes it a versatile choice for users who want to enjoy their favorite playlists without the hassle of tangled wires.

Another important characteristic of the HT-DD5000 is its user-friendly interface. The remote control simplifies operation, providing easy access to all features. The setup process is straightforward, aided by an intuitive on-screen menu that guides users through the installation of speakers and configuration options.

In conclusion, the Sharp HT-DD5000 is a well-rounded home theater system that excels in delivering a comprehensive audio experience. With its advanced sound technologies, extensive connectivity options, and user-friendly design, it stands out as an excellent choice for anyone looking to enhance their home entertainment setup. Whether you're hosting a movie night or simply enjoying your favorite tracks, the HT-DD5000 is sure to impress with its powerful sound and thoughtful features.