Cadence ZRS C9 warranty Ohm Bridged Mono Configuration, Channel Configuration

ZRS C9

4-Ohm Bridged Mono

Configuration

To amp -

4-Ohm

Single Voice Coil

To amp +

Or

DVC 2-Ohm

Wired in Series

to 4-Ohm

When bridging the ZRS C9, minimum impedance per channel is 4 ohm mono bridged. When using DVC 2 ohm woofers, voice coils must be wired in series to 4 ohm.

	DVC 2-Ohm
	Wired in Series
	to 4-Ohm
	Or
To amp +	4-Ohm
	Single Voice Coil
To amp -

3-Channel

Configuration

Channels 1 and 2 to Front Left + Front Right component speakers with channels 3 and 4 bridged to 4 ohm mono load.

Channels 3 and 4 can be bridged to one 4-Ohm mono woofer.

Two 2-Ohm woofers can be used for Stereo bass on Channels 3 and 4.

MidrangeMidrange

Tweeter Tweeter

CrossoverCrossover

	DVC 2-Ohm
	Wired in Series
	to 4-Ohm
	Or
To amp +	4-Ohm
	Single Voice Coil
To amp -