Features

The CV-5000 amplifier delivers the following power ratings.

2 x 1100 Watts at 8 ohm, 2 x 1800 Watts at 4 ohms and 2 x 2500 Watts at 2 ohms

2-channel, parallel or bridged mono operating modes for flexible application - 5000 Watts

…and the following features.

∙Independent limiters for each channel reduce distortion.

∙Independent input level controls for each channel allow precision adjustments.

∙Precise signal and clip LED indicators to monitor performance, allow you to correct for overloading (clipping) condition.

∙Low-frequency filters (30Hz or 50Hz) remove rumble and subsonic frequency.

∙Twin-tunnel and two temperature-sensitivity forced-air cooling system to maintain a low, temperature working condition.

∙Balanced XLR or balanced 1/4-inch TRS Combination input connector for each channel and LINK ports.

∙5-way output binding posts or Speaker connectors enable secure operation.

∙High-current toroidal transformer for absolute reliability.

∙Independent DC and thermal overload protection on each channel automatically protects amplifier and speaker.

∙The CV-5000 can be mounted in any standard 19” rack.