Dynamic Distributors Switch Cubes appendix Turn Signal Function, Additional Features

O p e r a t i o n / F u n c t i o n

Turn Signal Function:

The turn signal selection buttons are located on the left and right handle bar switch cubes. The turn signals are activated by pressing the appropriate button. The turn signals will flash for 7 seconds then automatically cancel. The number of flashes or seconds remaining will be displayed in the information window of the LCD Screen. If more flash time is required simply press and hold the turn signal button, and the number of seconds or flashes increases. The signal can be cancelled manually by pressing the same button again. If the brakes are applied while the turn signal is flashing they will continue to flash until the brakes are released plus 10 seconds.

Additional Features:

•Turn Signal Count Down: With self-canceling turn signals, it is a definite advantage to be able to know when the self-canceling feature will stop flashing the turn signal. This feature shows you the remaining flashes on the LCD display screen. When the turn signal has been activated, it will alternately flash an arrow and then remaining time (seconds) of flashes.

•Turn Signal Hold: If the brakes are applied after a turn signal has been selected, the flashers will continue to flash as long as the brakes are applied plus 10 seconds. This feature is beneficial when stopped at a signal light, it will keep the turn signal engaged until the brake is released, and it will then flash an additional 10 seconds.

•Hazard Flashers: When selected will flash until cancelled and a hazard icon will be shown on the LCD display screen. To engage, depress both the left and right turn signal buttons for 1 second. To cancel, depress both buttons again for one second.

16