18
Program Mode:To enter the program mode, the bike’s run/kill switch must be in “kill”
position. After selecting “kill”, the press ( * ) and ( # ) together for 5
seconds. The program menu will then pop-up on the LCD screen.
The following keys are used to program the module:
Key Function
High / Low -Scroll Up
Horn -Scroll Down
( * ) -Select
Programmable Items:• Screen Contrast – To adjust the contrast of the display.
• Time – This is the time displayed on the screen in the Operating
Mode and is used for error logging.
• Date – This is the date used for error logging.
• Metric or SAE – toggles the display from MPH/KPH,
Fahrenheit/Celsius on the thermometer and from Miles/Kilometers
on the odometer and trips display.
• Calibrate Temperature – Use this setting to calibrate your bikes
temperature to a known thermometer.
• Tach Multiplier – Used to set the number of pulses sent per engine
revolution.
• Max RPM - Set or View Max RPM (Max RPM may only be set
once on some bikes).
Programming