3
Locating Rear Module
The rear module is identified by its’ Black Connector, and should be
located in an area that is close to the battery and Starter Solenoid, and
also central to all of the devices it connects to. The module is splash
proof, but should be mounted in an area that has some protection from
water and heat. Under the seat on the battery box is usually a good
location. The module mounts with the enclosed double sided tape.
Locating Front Module
The front module is identified by it’s Grey Connector, and should be
located in an area that is central to all of the devices it connects to.
Under the gas tank, or in the headlight housing are two common
locations. The module is splash proof, but should be mounted in an area
that has some protection from water and heat. Once the two modules are
mounted the 4 wires that connect them should be connected. A 4 pin
connector is included, but these wires can be cut or extended as needed.
The module mounts with the enclosed double sided tape.
Installation