11
Right Handlebar Switch Module Functions Operation / Function
R
ight Turn
Starts or cancels right turn signal
function. (See turn signal function
below)
Start
Will activate the engine starter solenoid
circuit if: the Run/Kill switch is set to
Run, the bike is in neutral, and the
engine is not running (RPM =0).
R
un / Kill
Will allow the bike to start if the Run
function is selected. Will kill the engine
or prevent a start if the Kill function is
selected. An X will be visible on the
LCD display screen if the kill switch has
been selected and is in the kill mode.
( # )
Toggles between Odometer, Trip 1, Trip
2, and Voltage / Temperature if pressed
quickly.
Press and hold on trip 1 or 2, for 3
seconds to reset trip mileage to 0. Used
for calibrating the speedometer in
calibration mode (see programming
section).