INSTALLATION
LOGO ROTATION
1 - Remove the transparent cover which protects controls and then the 4 screws which block the metal plate by using multispanner.
2 - Remove the plate without damaging the |
|
silkscreen printed panel which will have to |
|
stay on. We suggest that you seize both plate |
|
grips with your hands and pull them by | P O W E R |
| |
blocking the silkscreen printed panel with | REMOTE |
| IN OUT |
your fingers against the amplifier chassis at | FUSE |
the same time. This will permit to remove the |
|
plate from the panel without damages. |
|
3 - Remove the strip with audison logo.
4 - Put the strip back again after turning it, so that audison logo is upside down.
5 - Mount the plate back by fixing it through the screws; then,
IN-OUT PANEL
FUNCTIONS
1
FRONT-WF/REAR-TW/SUB
Power outputs of the amplifier Front, Rear and Sub channels. Connect the speakers cables to these outputs according to polarity. Terminal blocks accept cables up to 9 A.W.G. max (see “audison cable products for electric connections” as far as their size is concerned). We recommend the use of audison cable products.
Please use
(3 Ch.) and to exploit the maximum power insured by this configuration. | 2 |
|
PPS (Phantom Power Supply)
Power supply socket for audison external audio accessories.
2
53
1 | 1 |
34
IN FRONT / 3 Ch-mono
Left (L) and right (R) channels inputs of the amplifier Front system. Front preamplified outputs of a source (head unit, CD player, DAT, etc.) or of an external electronic crossover must be connected to them. In three channel configuration (3 ch), the right channel (R) drives Front outputs in mono, while the left channel (L) drives Rear ones in mono. The subwoofer can be driven by these two inputs together; if the source has the necessary, special output, it can be driven through In Sub input, to select through the proper switch.
4
IN REAR/OUT
Left (L) and right (R) channels inputs of the amplifier REAR system. Rear preamplified outputs of a source (head unit, CD player, DAT, etc.) or of an external electronic crossover must be connected to them. These inputs can also be configured as amplifier
5
IN SUB
Left (L) and right (R) channels inputs. They accept the possible subwoofer preamplified output coming from the source. Since subwoofer output is mono, the two inputs are to be mixed when used together.
20 | 5 |