Audison LRX 5.600 manual Audison measurement standards

Page 1

Audison measurement standards

(Power measures taken according to audison standard, 1998 edition)

-12VDC and 13.8VDC;

-1 kHz or crossover cut-off frequency;

-0.3% THD @ nominal power; 1% THD @ continuous power;

-Tolerance: +10%; -5%;

-Continous power given by RMS Voltage measured on resistive load;

-The nominal power of the amplifier is measured upon a battery voltage of 12 Volts with a 4 Ohm load and with all channels in function.

OWNER’S MANUAL

CAR POWER AMPLIFIER

PRINTED IN ITALY - Code 10125780

is a division of

62018 Potenza Picena (MC) Italy

Tel. 0733.870870 • Fax 0733.870880 • http://www.audison.com • e-mail: com@audison.com

Image 1
Contents Audison measurement standards Introduction PrecautionsIntroduction Contents InstallationAmplifier Fixing Electric Connections DescriptionLRx 5.600 Fuse 50A Logo Rotation IN-OUT PanelFunctions Configuration Examples Power Supply PanelChannel FRONT+REAR Fuse Replacement FRONT+REAR+SUB F-R ModeMULTICHANNEL+SUB Functions and Controls Configurations Table Controls Panel ConfigurationsControls Panel Diagram and Configuration Switches Controls Panel Block DiagramSubsonic Accessories Setting PanelAmplifier Configuration Ch. Select 5 Ch. 3 Ch. monoCLK2 LRx Cooling Kit InstallationSubsonic Filter CUT-OFF Frequency Modification VCA-VCA1D Modules InsertionSize for Fixing Technical FeaturesVCR01K,VCRAK and Vcrdk LRx