Connection
Mounting the Terminal Cover
•The product’s appearance can be improved by mounting the terminal cover on the main unit after installation.
•Mount the terminal cover after the connections have been made and you have checked that operation is normal.
1Open the door.
1)Use the included hexagonal wrench to remove the two hexagonal screws q fastening the door p.
2)Open the door p.
q
p
Fig. 10
2 Mounting the terminal cover
1)Before mounting the terminal cover
•Fasten the wires securely together in a position in which they will not touch the termi- nal cover.
2)Use the two included hexagon screws (M3) e to mount the included terminal cover w to the top surface of the terminal section.
* Tighten the screws securely so that they do not come loose due to vibrations while the vehicle is moving.
3)After mounting the terminal cover
•Check that the cords do not touch the terminal cover.
*If the cords touch the terminal cover, the vibrations of the vehicle may damage the wires or cause
e
p
w
Fig. 11