IBM Complete Guide to Adjusting Settings for Your Car Stereo System

Additional settings (OPTION)

You can lock the controls, change the on-screen language, change the menu position, and set the COLOR mode.

1Press the button.

The menu appears on the screen.

2Press the m/M buttons to highlight

OPTION and press the button.

The OPTION menu appears on the screen.

3Press the m/M buttons to select the desired adjustment item.

Adjust the selected item according to the following instructions.

xLocking the controls (CONTROL LOCK)

You can protect the adjustment data by locking the controls.

Press the m/M buttons to highlight (CONTROL

LOCK) and press the button. Then press the m/M

buttons to select ON and press the button.

Only the ! (power) button, button, (input) switch, ,

and (CONTROL LOCK) of the OPTION menu will

operate. If any other items are selected, the mark appears on the screen.

To cancel the control lock

Repeat the procedure above and set (CONTROL LOCK) to OFF.

xChanging the on-screen language

(LANGUAGE)

See page 7.

xChanging the menu’s position

(OSD POSITION)

Change the menu’s position if it is blocking an image on the screen.

Press the m/M buttons to select (OSD POSITION)

for horizontal adjustment, or (OSD POSITION) for

vertical adjustment and press the button. Then press the </, buttons to shift the on-screen menu.

Then press the button.

xSetting the COLOR mode

See page 12.

Resetting the adjustments (RESET)

This monitor has the following 2 reset methods.

xResetting all the adjustment data for the current input signal

1Press the button.

The menu appears on the screen.

2Press the m/M buttons to highlight

0 RESET and press the button.

3Press the m/M buttons to select 01 (CURRENT

MODE) and press the button.

4Press the m/M buttons to select OK.

RESET
1
2	CURRENT
	MODE
	OK
	CANCEL
1 6 0 0 x 1 2 0 0 / 8 5 H z

Note that the following items are not reset by this method:
• on-screen menu language (page 7)	US

•color mode setting in the OPTION menu (PRESET, VARIABLE, EXPERT, sRGB) (page 12)

•color temperature setting in the PRESET mode (9300K, 6500K, 5000K) (page 12)

•on-screen menu position (page 14)

xResetting all of the adjustment data for all input signals

Select 02 (ALL MODES) in step 3 above.

Note

The RESET function does not function when (CONTROL LOCK) is set to ON.

14