IBM P275 Precautions, Installation, Maintenance, Transportation, Use of the Tilt-Swivel

Page 4

Precautions

Installation

Do not install the monitor in the following places:

•on surfaces (rugs, blankets, etc.) or near materials (curtains, draperies, etc.) that may block the ventilation holes

•near heat sources such as radiators or air ducts, or in a place subject to direct sunlight

•in a place subject to severe temperature changes

•in a place subject to mechanical vibration or shock

•on an unstable surface

•near equipment which generates magnetism, such as a transformer or high voltage power lines

•near or on a magnetically charged metal surface.

•in a small space around the top, bottom and sides of the monitor that may block the ventilation holes.

Maintenance

•Clean the cabinet, panel and controls with a soft cloth lightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent, such as alcohol or benzine.

•Do not rub, touch, or tap the surface of the screen with sharp or abrasive items such as a ballpoint pen or screwdriver. This type of contact may result in a scratched picture tube.

•Clean the screen with a soft cloth. If you use a glass cleaning liquid, do not use any type of cleaner containing an anti-static solution or similar additive as this may scratch the screen’s coating.

Transportation

When you transport this monitor for repair or shipment, use the original carton and packing materials.

Use of the Tilt-Swivel

This monitor can be adjusted within the angles shown below. To find the center of the monitor’s turning radius, align the center of the monitor’s screen with the centering mark on the stand.

Hold the monitor at the bottom with both hands when you turn it horizontally or vertically. Be careful not to pinch your fingers at the back of the monitor when you tilt the monitor up vertically.

90° 15°

90°

5°

Centering mark

Note

Do not remove the tilt-swivel base from the monitor.

Warning on power connection

•Use an appropriate power cord for your local power supply.

Example of plug types:

US

for 100 to 120 V AC for 200 to 240 V AC for 240 V AC only

•Before disconnecting the power cord, wait at least 30 seconds after turning off the power to allow the static electricity on the CRT display surface to discharge.

•After the power has been turned on, the CRT is demagnetized (degaussed) for a few seconds. This generates a strong magnetic field around the metal frame, which may affect the data stored on magnetic tapes and disks near the bezel. Place magnetic recording equipment, tapes, and disks away from this monitor.

The equipment should be installed near an easily accessible electrical outlet.

2

Page 3 Page 5
Image 4
Page 3 Page 5
Contents P275 Edition IBM HelpCenterTable of Contents Precautions InstallationMaintenance TransportationIdentifying parts and controls Front RearVideo input connector 2 DVI 2 SetupConnect your monitor to your computer Connect the power cord Turn on the monitor and computerIf no picture appears on your screen Workplace PreparationSelecting the input signal Using the , m/M, and /, buttonsCustomizing Your Monitor Navigating the menuSelecting the on-screen menu language Menu itemsAdjusting the brightness If you are using the sRGB modeReset Contrast CONTRAST/BRIGHTAdjusting the centering of the picture SIZE/CENTER Adjusting the size of the picture SIZE/CENTERAutomatically sizing and centering the picture Auto Press the m/M buttons to select AUTO. Then Press the buttonAdjusting the shape of the picture Geometry Adjusting the convergencePress the /, buttons to make the adjustment Select To Press the /, buttons to make the adjustment SelectPress the m/M or /, buttons to make the adjustment Select Adjusting the picture quality ScreenPress the m/M buttons to highlight Screen Press the button Adjusting the color of the picture Color Select the Color modePreset mode Variable modeSRGB mode Expert modePress the m/M buttons to highlight Press the button Color Additional settings Option Resetting the adjustments ResetTechnical Features TroubleshootingIf OUT of Scan Range appears on line Trouble symptoms and remedies Symptom Check these items Picture is ghosting Hum is heard right after the power is turned onPicture is not centered or sized properly Edges of the image are curvedSpecifications If the ! power indicator is greenIf the ! power indicator is flashing orange Self-diagnosis functionPreset mode timing table Service Information Monitor InformationCable Information Model Description

P275 specifications

The IBM P275 is a remarkable workstation that exemplifies IBM's commitment to delivering high-performance computing solutions tailored for professionals and enterprises. This device is noteworthy for its versatility, robust specifications, and advanced technology integrations, making it an ideal choice for a variety of demanding applications, from data analysis and 3D modeling to software development and multimedia content creation.

One of the standout features of the IBM P275 is its powerful processor options. Equipped with multi-core processors, the workstation offers exceptional speed and responsiveness, enabling users to handle complex tasks with ease. The P275 can be configured with Intel Xeon or high-end Intel Core processors, providing users with the performance needed to manage resource-intensive applications.

Another significant aspect of the P275 is its memory capacity. The workstation supports a substantial amount of RAM, which is crucial for multitasking and ensures smooth performance when running memory-intensive applications. Depending on the configuration, the P275 can support up to 128GB of RAM, allowing users to run multiple applications simultaneously without experiencing any slowdown.

In terms of storage, the IBM P275 offers a range of options, including high-speed SSDs and traditional HDDs, which can be configured to meet the specific needs of users. The inclusion of NVMe SSD technology not only enhances boot times but also significantly improves data access speeds, ultimately optimizing overall system performance.

The graphics capabilities of the P275 are equally impressive. With options for professional-grade GPUs such as NVIDIA Quadro or AMD Radeon Pro, this workstation caters to graphics-intensive applications, making it suitable for industries that rely heavily on visual computing, such as engineering, CAD, and video production.

Connectivity is also a highlight of the IBM P275. The workstation comes equipped with multiple ports, including USB 3.1, HDMI, and DisplayPort options, ensuring compatibility with a wide range of peripherals and external devices. Additionally, the P275 features advanced networking options, including Ethernet and the capability for Wi-Fi connectivity, which enhances collaboration and data sharing within organizations.

The design of the IBM P275 reflects a thoughtful approach to thermal management and durability. Its chassis provides efficient cooling mechanisms to ensure the system remains stable during heavy workloads, and its rugged construction ensures longevity, which is essential for enterprise environments.

Overall, the IBM P275 is a powerful, versatile workstation that combines cutting-edge technology with strong performance characteristics. Its various configurations allow users to tailor the system to their unique requirements, making it an excellent investment for professionals seeking reliability and efficiency in their computing solutions.
Top Page Image Contents