IBM P275 Setup, Connect your monitor to your computer, Video input connector 2 DVI 2

Rear

AC IN

8Video input connector 2 (DVI) (2 ) (page 4)

Inputs RGB video and sync signals (0.700 Vp-p, positive) through a DVI-A connector.

C4		C3	24 23 22 21 20 19 18 17
			16 15 14 13 12 11 10							9
C2		C1
			8	7	6	5	4	3	2	1
	C5

Setup

This monitor works with platforms running at horizontal frequencies between 30 and 130 kHz.

Step 1:Connect your monitor to your computer

Turn off the monitor and computer before connecting.

Connect the appropriate end of the video signal cable to the video output of your computer.

Connect the other end of the video signal cable to the appropriate input of the monitor.

If you attach the video signal cable to the video input connector 1

on the back of the monitor, set the (input) switch on the front of the monitor to 1.

Notes

•Do not touch the pins of the video signal cable connector as this might bend the pins.

•When connecting the video signal cable, check the alignment of the video input connector. Do not force the video input connector in the wrong way or the pins might bend.

Pin No.	Signal
C1	Red
C2	Green
C3	Blue
C4	H. Sync
C5	Ground (R/G/B)

1—

2—

3—

4—

5—

6Data Clock(SCL)*

7Bi-Directional Data (SDA)*

8V.Sync

9—

Pin No. Signal

10—

11—

12—

13—

14DDC + 5V*

15Ground

16Hot Plug Detect

17—

18—

19—

20—

21—

22—

23—

24—

To a computer	US
with an HD15
video output	forward side
	backward side

AC IN

forwardside

backward side

To a computer with a

DVI video output

* Display Data Channel (DDC) Standard of VESA

(continued)

4