Specifications, Viper model 200.4

SPECIFICATIONS

RMS continuous power per channel, All channels driven into 4 ohms from 20 to 20,000 Hz, with less than 0.08% Total Harmonic Distortion @ 14.4 VDCC

RMS continuous power per channel, All channels driven into 2 ohms from 20 to 20,000 Hz, with less than 0.1% Total Harmonic Distortion @ 14.4 VDC

RMS continuous power, 2-channel operation, bridged into 4 ohms from 20 to 20,000 Hz, with less than 0.1% Total Harmonic Distortion @ 14.4 VDC

Dynamic power rating (IHF-202 Standard) bridged into 4 ohms

3575

watts watts

50125

watts watts

100x2 250x2

watts watts

250600

watts watts

Signal-to-Noise Ratio

Frequency Response

Damping Factor @ 4 ohm

Crossover

Bass Equalization

Input Impedance

Input Sensitivity

Output Impedance

Supply Voltage Fusing and Power

Minimum Cable Requirements (AWG) (Per amp, trunk mounted)

Greater than 95 dB

20-20,000 Hz ± 0.5 dB

Greater than 100

Switchable high or low pass 12 dB/octave, continuously variable from 50 to 500Hz

+8 dB, centered at 40Hz

20K ohms

Variable from 150 mV to 8 volt

2 to 8 ohms, stereo

4 to 8 ohms, bridged

10 to 16 VDC

25A 50A

#12 #8