Viper 500.4 manual Features, „ Summed stereo full-range RCA output jacks

Page 5

FEATURES

„High-speed MOSFET switching power supply and complimentary bipolar outputs.

„Four channel architecture supports up to six channel use.

„Thermal, DC offset, reverse polarity and short circuit protection.

„Top-mounted controls located under illuminated Viper snake logo trim piece.

„The Viper logo and Viper badge are four-way adjustable for a custom look.

„Dual continuously variable 12

dB/octave two-way active crossovers.

„Dual switchable 8 dB bass EQ func- tion.

„Summed stereo full-range RCA output jacks.

„Gold-plated screw-block plugs and RCA jacks ensure maximum signal transfer.

„Rugged one-piece extruded heat sink finished with injection-molded mounting feet.

WARNING

High-powered car audio systems may produce sound pressure levels that exceed the

threshold at which hearing loss may result.

They may also impair a driver’s ability to hear traffic sounds or emergency vehi- cles. Use common sense and practice safe listening habits when listening to or adjusting your audio system.

© 2002 Directed Electronics, Inc

5

Image 5
Contents Models Directed Electronics, Inc Congratulations Table of ContentsLimited TWO-YEAR Consumer Warranty „ Summed stereo full-range RCA output jacks FeaturesInstallation Guidelines Wire Connector Plugs Rear Panel Connections Front Panel CONNECTIONS/STATUS LEDAmplifier Connections 200.4 Rear Amplifier Controls TOP TOP Panel ControlsControl Panel Cover TOP Panel FeaturesSpeaker Wiring Diagrams Simultaneous stereo/mono operation bottom view Crossover Settings and Gain Adjustment Viper model 200.4 SpecificationsDirected Electronics, Inc Vista, California