Interfire Audio G2-1200, G4-1000, G5-900, G2-800, G4-800, G4-600, G2-600 Installation Diagram

Page 5

INSTALLATION

MOUNTING:

1.After reading precaution, decide where you are going to install the unit. Also, see Fig.1.

2.Once the location has been determined, place the amplifier into position. Using a felt tip pen or pencil mark the four holes to be drilled for mounting. NEVER use the amplifier as a template for drilling. It is very easy to damage the amplifier surface in this manner.

3.Remove amplifier. Drill four 3.5 m/m holes into mounting surface. If you want to mount the amplifier to MDF or wood panel, drill four 3.0m/m diameter holes into mounting surface.

4.If possible, test the system to ensure it is operating correctly before final mounting of the amplifier.

5.Mount the amplifier using the supplied 4 self tapping screws.

INSTALLATION DIAGRAM

Self Tapping Screws

FIG.1

3

Image 5
Contents G2-600 / G2-800 / G2-1200 G4-600 / G4-800 / G4-1000 G5-900 Page Congratulations on your Purchase Page Installation Diagram InstallationInput Connections Connections2CHANNEL System Wiring Diagram 4CHANNEL System Wiring Diagram 5CHANNEL System Wiring Diagram Speaker Connections CH Speaker Wiring DiagramSpeaker HEX Mode G5-900 Adjustments 4CHANNEL FRONT/REAR Panel 2CHANNEL5CHANNEL FRONT/REAR Panel 4CHANNELTrouble Shooting Guide Specification G4-600 G4-800 G4-1000 G5-900 Warranty Interfire Audio, Inc