Operation and Controls
CA-30RK550
1 | 2 | 3 | 4 |
Front Panel
1. | Power On LED: | 3. | Tilt: |
| Indicates power is on when lit. |
| Adjust potentiometer provides for slope adjustment over entire bandwidth. |
2. | R.F. Gain: | 4. | |
| Adjust potentiometer for overall amplifier gain level. |
| Output test point is provided for amplifier set up and monitoring. |
|
|
|
|
1 | 3 | 3 |
Back Panel
1.OUT:
The amplified RF signal is available at this port.
2.IN:
The input RF signal is connected to this port.
3.Power Cord:
This three prong polarized power cord is approved by both UL and CSA for safe operation of the amplifier. Do not cut the ground terminal for both safety and operational reasons. Connect to 108 to 125 Vac, 50/60 Hz electrical outlet
6 | Ph: |
Rev. 08/03