Mobile Mount Mechanical Installation
The MM4 Mobile Mount provides two basic mounting options, to allow maximum flexibility in location. The DC/DC module is shipped separately and is mounted external to the Mobile
Mount, depending on the individual location’s requirements.
“W”
“H”
“D”
It is important to leave a free zone around the printer to allow loading of paper and routine cleaning of the print head. Refer to Figure 2. In addition, the Mobile Mount allows for some rotation of the printer to allow the best positioning for the operator. Extra clearance should be provided for this movement if it is desired in the installation.
Vertical Mounting
(numbers in italics are in cm.)
height | Width | Depth | depth w/ bin |
“H” | “W” | “D” |
|
|
|
|
|
21.32 in*. | 11.63 in. | 8.2 in. | 11.07 in. |
|
|
|
|
54.2 CM* | 29.5 CM | 20.83 CM | 28.1 CM |
|
|
|
|
“W”
“H”
Horizontal Mounting
(numbers in italics are in cm.)
height | width | depth | depth w/ |
“H” | “W” | “D” | bin |
|
|
|
|
14.30 in.* | 11.63 in. | 15.65 in. | 18.00 in. |
|
|
|
|
36.32* | 29.5 | 39.75 | 45.72 |
|
|
|
|
*Includes minimum dimension to allow access to controls.
“D” | IMPORTANT: Mount the Printer where | |
it will not interfere with the operator | ||
| ||
| during normal use, nor have the | |
| potential to cause injury in case of | |
| an accident. |
Figure 1
Standard Mounting Configurations
P1005089 Rev. C | pg. 5 of 13 |