8.72 in.
22.15 cm
DIM. “A”
Allowance for media cover opening
Minimum clearance for
Printer controls
DIM. “B”
9.83 in.
24.97 cm
2.35in.
5.97cm
9.83” 24.97 cm
2.50 in.
6.35 cm
|
|
|
|
|
|
|
|
|
|
|
| 11.50” | |
|
|
|
| 29.21 cm |
| |
|
|
|
|
|
|
|
| QL 420 | P4T |
| QLn420 | ||
|
|
|
|
|
|
|
Dim. “A” | 5.82 in. | 5.92 in. |
| 7.00 in. | ||
[14,78 cm) | [15,04 cm) |
| [17,78 cm] | |||
|
| |||||
|
|
|
|
|
|
|
Dim “b” | 2.80 in. | 4.05 in. |
| 2.75 in | ||
[7,11 cm] | [10,28 cm] |
| [6,98 cm] | |||
|
| |||||
|
|
|
|
|
|
|
Figure 2
Horizontal and Vertical Mounting Details (QL 420 illustrated)
Use a 1/4” (6 mm) drill bit to make mounting holes. Secure the mount with nuts, bolts, and lock washers.
Refer to Figure 2 for details on mounting dimensions.
The mounting bracket (Figure 3) can also be used as a template for locating mounting holes on the vehicle. Note that a clearance of .31” (7.8 mm) must be left on either side of the Mounting Bracket for mounting hardware. The mounting dimensions in Figure 1 reflect this.
pg. 6 of 13 | P1005089 Rev. C |