![](/images/new-backgrounds/1242769/24276915x1.webp)
If the car stereo features a mute jack, connect the yellow wire of the mute cable to one of the «Mute in» jacks (1, 2 or 3). Refer to your car stereo’s manual to determine the position of the mute jack.
CABLE DIAGRAM CONNECTION ![](/images/new-backgrounds/1242769/24276915xi2.webp)
CAUTION
-The red wire of the power cable must be connected to the constant 12V supply, the orange wire to the ignition 12V and the black wire to earth.
-Check the wiring diagram of the car stereo’s ISO power connector plug.
-On some vehicles, the positions of the red and orange wires may need to be reversed.
This can easily be done by reversing the fuse holders.
-Do not connect the orange wire to the constant 12V supply, as you could run down the vehicle’s battery.
Car stereo without an ISO plug:
You can use a specific adapter for the vehicle (not supplied)
If you do not have an adapter, connect each wire in turn if your vehicle does not have ISO connector plugs.
If the car stereo has a mute jack, connect using the yellow wire of the mute cable.
8 | User's guide |
|