Main Access Menu
Main Access Menu
The MAIN menu can be access by pressing the MENU button on the remote or by touching the Area A (upper left hand side) on the monitor.
Touch Access Buttons
1)Touch to access AM/FM TUNER mode.
) Touch to access CD/DVD mode, CD/DVD must be inserted.
3)Touch to access XM MODE. (XM Receiver must be connected to activate).
4)Touch to access iPOD mode. (iPod must be connected to activate)
5)Touch to access NAVIGATION mode
6)Touch to access CAMERA mode. (If optional camera isn't connected then "No Video Signal" will be displayed).
7)Touch to access AUXILIARY A/V INPUT mode.
8)Touch to access BLUETOOTH mode. (BLUETOOTH must be activated first).
9)Touch to STANDBY screen.
1 | 2 | 3 | 4 | 5 |
6 7 8 9
Operation
Source Selection
Sources can also be selected by pressing the SRC button on the front panel to change among TUNER, Disc, iPod, SAT, AUX IN, CAMERA (rear view video
camera) and NAVI. The source mode is displayed on the Monitor.
Standby Mode
In the standby mode, the LCD is off with audio input only. The VOLUME level can be controlled without interrupting STANDBY. Touch screen again or any button to resume display.
Rear Zone
Touch to access the rear zone source menu. Press and hold the SRC button on the front panel to toggle REAR ZONE mode On.
Exit Rear Zone
Touch the STANDBY button on the rear zone menu.
Selecting Front Zone Source
The Main Menu allows you to select a source for the front zone.
Access General Setup Menu
•Press the SETUP button to access the GENERAL setup mode
•Select desired parameter you wish to change
•Page will return to previous screen after 10 sec. of inactivity or by pressing the arrow to exit.
11