OEM Systems CH-4100 Initializing Parking Brake, Front Monitor Video Initialization

Initializing Parking Brake

SAFETY WARNING

•The video display of the in-dash unit will not operate while the vehicle is moving.

•As a safety feature, “ENGAGE PARKING BRAKE” blue screen will show on the display when the vehicle's parking brake is not engaged. Video display on the front monitor isn't allowed until the PARKING BRAKE is active, however, DVD and AV1 audio can be heard while the vehicle is in motion without engaging the parking brake.

•This is a safety feature to prevent driver distraction. It is illegal in most states for the driver to view video while the vehicle is in motion. Refer to local laws in your area.

CAUTION !!!

IT'S UNLAWFUL TO OPERATE A VEHICLE WHILE VIDEO IS

DISPLAYED IN THE DRIVERS VIEWING AREA.

ENGAGE EMERGENCY BRAKE

TO ENJOY VIDEO

Front Monitor Video Initialization

Follow this two initialization procedure carefully to allow video playback on CH-4100front panel monitor:

There are usually two situations that start the PARKING BRAKE Sequence.

Initializing Parking Brake Scenario 1

First situation is while driving:

1)Stop vehicle, put in Park, make sure PARKING BRAKE is off / released

) Depress PARKING BRAKE for 2 to 3 seconds

3)Release PARKING BRAKE for 2 to 3 seconds

4)Depress PARKING BRAKE permanently

Once above procedure 1-4 is completed, approx 3 sec—video will display.

Initializing Parking Brake Scenario 2

Second situation is while already parked and the PARKING BRAKE is already depressed:

1)Keep vehicle in Park, PARKING BRAKE should be off

) Release PARKING BRAKE for 2 to 3 seconds

3)Depress PARKING BRAKE for 2 to 3 seconds

4)Release PARKING BRAKE for 2 to 3 seconds

5)Depress PARKING BRAKE permanently

Notes:

•Once 2nd procedure is completed, approx 5 sec—video will display.

•This procedure will have to repeated if the IGN is turned off.

•The transition time must be less than 2 seconds between depressed and released.

DVD

19