Installation Method

This is an anti-theft installation method.

The main unit wears a METAL MOUNTING SLEEVE.

Please connect the wiring, eg, the Power Supply, the Speakers and the Antenna according to the requirements of this Instruction Manual, then install the metal mounting sleeve into the car as per the diagram illustrated below.

METAL SUPPORT STRAP To raise the anti-skip capability of the unit please ensure the metal support strap is connected firmly to the car chassis.

DASHBOARD

METAL MOUNTING SLEEVE

To remove the CD player from the Cage insert the supplied keys into the Left and Right side slots of the chassis then pull the chassis out of the cage as shown.

To properly fix the metal mounting sleeve, bend the tabs of the sleeve against the DASH BOARD with a screwdriver.

UNIT CHASSIS

PLASTIC TRIM RING

FRONT PANEL

NOTE

Remove the two screws that protect the CD player during transportation before operating the player.

To attach the removable faceplate, insert the right side of the faceplate into the left of the CD player chassis first. Then push the left side of the faceplate into the chassis until.

Push this reset button with a cuspidal object to renovate the distorted program once the program is distorted.

RESET BUTTON

NOTE:

When needing to insert MMC/SD card into the MMC/SD card compartment or to insert USB bar into the USB socket, pull the plastic cover rightward away from the player and then store it for safety. When no needing to do MMC/SD or USB operation, please make the plastic cover match its right position in the front panel and then push it from right to left till get to the right position of the front panel.

To remove the front panel from the unit chassis, press the REL key to release the front panel from the unit chassis, then pull it up a little to take out from the unit chassis.

E 10