Nextar NC990C manual Disc Maintenance, Precautions and Maintenance

Page 9

DISC MAINTENANCE:

1.Before playing, clean the disc with a clean, lint-free cloth. Wipe the disc in the direction of the arrow.

Do not use solvents such as benzine, thinners. Commercially available cleaners or anti static spray will damage the unit.

2.Do not insert a disc with the label surface down. Doing so may damage the unit. Do not try to insert another disc when one has been already inserted.

Doing so may damage the unit.

3.Handle the disc by its edge. And to keep the disc clean, do not touch the surface. Do not stick paper or tape on the disc.

Do not expose the disc to direct sunlight or heat sources such as hot air vents.

Or leave it in a car parked in direct sunlight where there can be a considerable rise in temperature.

PRECAUTIONS AND MAINTENANCE

1. If the car interior is extremely hot, as after being parked in the sun, do not use the player until the car has been driven for a while to cool off the interior.

2. The protective case is to safely keep the front panel.

3.The unit is designed for negative terminal of the battery which is connected to the vehicle metal. Please confirm it before installation.

4.Do not allow the speaker wires to be shorted together when the unit is switched on. Otherwise it may overload or burn out the power amplifier.

5.Do not install the detachable panel before connecting the wire.

E 8

Image 9
Contents RDM LOU About this Manual Dear CustomerLocation and Function of Controls SEL Audio Mode SELECT/ROTARY EncoderBeep 2ND, Beep ALL, Beep OFF Mode Fader ControlVOL LAST/VOL ADJ AUTO-STORAGE/PRESET Memory Scan Button Band Button Power ButtonLoudness Button LOCAL/DISTANCE ButtonRelease Button Mode ButtonReset Button Infrared Remote Control Sensor Eject ButtonClock Button Scan ButtonPrecautions and Maintenance Disc MaintenanceMaintenance of Remote Controller Battery InformationWiring Diagram Installation Method Play Trouble ShootingSpecification