Toshiba MEGF60 owner manual Specifications

Page 69

Specifications

Built-in battery

Rechargeable lithium-ion battery

Weight

MEGF60 and MEGF40

Approx. 170 g (main unit only)

 

MEGF20 and MEGF10

Approx. 160 g (main unit only)

External dimensions

MEGF60 and MEGF40

Approx. 63 mm x 19 mm x 106 mm

 

 

 

 

(width x height x depth), excluding

 

 

 

 

projections

 

MEGF20 and MEGF10

Approx. 63mm x 16 mm x 106 mm

 

 

 

 

(width x height x depth), excluding

 

 

 

 

projections

Audio format

MPEG-1 Audio Layer 3 (MP3)

 

Windows Media Audio (WMA)

 

PCM (WAV)

 

 

Sampling frequency

22.05 to 48 kHz (

p. 70)

Bit rate

16 to 320 kbps (

p. 70)

Recording media

MEGF60

Internal hard disk 60 GB*

 

MEGF40

Internal hard disk 40 GB*

 

MEGF20

Internal hard disk 20 GB*

 

MEGF10

Internal hard disk 10 GB*

Maximum recording time

MEGF60

Approx. 996** hours (at 128 kbps bit rate)

 

MEGF40

Approx. 664** hours (at 128 kbps bit rate)

 

MEGF20

Approx. 332** hours (at 128 kbps bit rate)

 

MEGF10

Approx. 166** hours (at 128 kbps bit rate)

Continuous playback time

Approx. 16 hours** (Built-in battery)

 

Assuming 128 kbps, 44.1 kHz WMA tracks (excluding content

 

protected with Windows Media DRM 10), in normal temperature

 

(25°C), backlight unlit, volume adjusted to center

 

The continuous playback time is a reference value but is not

 

guaranteed, since the actual playback time will vary depending on

 

the operating condition, ambient operating temperature, the number

 

of times the built-battery has been recharged, etc.

 

Even under allowable operating conditions, using the gigabeat at

 

low temperature will result in a reduction of the maximum continuous

 

playback time.

 

 

 

WAV tracks consume a lot of battery power, so the continuous

 

playback time of WAV tracks are significantly shorter than when MP3

 

or WMA tracks are played.

Operating conditions

Temperature: 5 to 35°C, Humidity: 30 to 80% (RH) (No condensation)

USB port

USB2.0/USB1.1

 

 

Headphone jack

3.5-mm jack/stereo type

 

Load impedance 16

 

S/N ratio

95 dB or higher

 

 

AC adapter

Input power condition:

100 to 240VAC, 50/60Hz

 

Rated output:

 

5V DC, 3 A

Color panel***

2.2 inch diagonal QVGA low temperature polysilicon TFT color panel

69

Welcome

Getting Ready

Using the Product Other Helpful Information

gigabeat F60_OP62_70(E)â¸î

69

05.4.19, 3:45 PM

Image 69
Contents  Toshiba Corporation Industry Canada Requirement FCC NoticeSafety icons Safety PrecautionsPrecautions for Use Safety Precautions from the previousWelcome AC Adapter Welcome Contents Supplied accessories WelcomeEnd-User License Agreement Product Registration Card Important Information on Use Cleaning the ProductHandling the Product Location of UseRecorded Tracks CopyrightsMusic CD Internal Hard Disk Important Information on Use from the previousBuilt-in Battery Precautions Concerning the Built-in Hard DiskSpecifications AC AdapterAC adapter ADP-15HH Key Product features Transfer Using Windows Media Player Transfer Using gigabeat roomProduct Overview Music CDOn the USB Cradle USB connection Transfer Using NapsterProduct Overview from the previous About the gigabeat room Front/Side View Names and Functions of the PartsTouch Tap Plus Touch OperationRear View Bottom ViewStrap attachment hole To the headphone jack of the main unit Equalizer buttonUSB Cradle How to Connect the gigabeat and the USB Cradle Playback status/the current track name Display WindowsBookmark p Recycle BIN p Artist in Main MENU/Album/Genre StructureWhen there is no tag information When there is album cover Photograph information,Folder icon Track iconDisplay Windows from the previous Setup windowThumbnail Photo Viewer windowDirect Charging from the AC Adapter Charging the Built-in BatteryPreparation Connect to the outletCharge Using the USB Cradle Charge with Connected to PC Using USB CableTo the USB connector of the PC Charging the Built-in Battery from the previous Turning the Power ON/OFF Press and hold the Power button Turning the Power ON/OFFPlaying Music Tracks Touch the center of the Plus Touch Using the Product OtherPlaying Music Tracks from the previous Controlling the Volume Press the VOL + or VOL buttonSkip Forward or Back Press the Menu button in the Play window Setting the Play ModeRAND. ALL Play mode OperationSetting the Equalizer Mode Equalizer mode Adjustments When User Has Been Selected Setting the Equalizer Mode from the previousTouch the left of the Plus Touch Touch the top or bottom of the Plus Touch to adjustPress the Menu button BookmarkingAll of the tracks that were registered will be played back Playing Back Playlists Moving Tracks to the Recycle Bin Using the Product Other HelpfulDeleting Tracks in the Recycle Bin Viewing Tracks in the Recycle BinDeletion confirmation window appears Viewing Track Information Playing Intro Intro mode Operationオーディオデータ1 Changing Screen ThemesScreen themes Set the Full-Screen Display While thumbnails are displayed Displaying Images Photo ViewerSeconds , and 20 Seconds Running the SlideshowDisplaying Images Photo Viewer from the previous Output of Audio from An Audio System Backing up Data to the gigabeat Gigabeat F60OP5259Eâ¸î 05.4.28, 400 PM Folders in the gigabeat Track Selection and Playback SequenceUsing the Product Other Helpful information Selections for the selected setting item will be displayed Changing/Checking SettingsCamera Screen will return to the Main Menu Changing/Checking Settings from the previousOther Helpful Information MP3 MPEG-1 Audio Layer TerminologyTag Information USB Mass Storage ClassUnsupported Data Error Message ListIssue Cause Solution Reference TroubleshootingSpecifications Combination of Sampling Frequency and Bit Rate Specifications from the previousToshiba Limited United states Warranty How to Obtain Warranty Services Gigabeat F60OP7175Eâ¸î 05.4.15, 455 PM  Toshiba Corporation

MEGF60 specifications

The Toshiba MEGF60 is an advanced microcontroller unit (MCU) that belongs to the esteemed family of Toshiba's 32-bit microcontrollers. Designed for a myriad of applications, including automotive, industrial, and consumer electronics, the MEGF60 is recognized for its robust performance, power efficiency, and integrated features that make it a versatile solution for engineers and developers.

At its core, the MEGF60 is powered by a high-performance 32-bit RISC CPU that operates at clock speeds up to 48 MHz. With a rich instruction set architecture, it provides optimized computational capabilities suitable for various tasks. The microcontroller can handle complex algorithms and multi-threaded operations, making it ideal for demanding applications.

One of the standout features of the MEGF60 is its extensive memory architecture. It is equipped with up to 128 KB of flash memory, allowing for ample space to store code and data. Additionally, it offers up to 20 KB of SRAM, which facilitates rapid data processing and reduces latency during operation. This extensive memory support is vital for applications that require high data throughput and quick access times.

The MEGF60 also excels in connectivity options, featuring built-in peripherals such as UART, SPI, and I²C interfaces. This enables seamless communication with other devices, sensors, and controllers, enhancing its functionality in embedded systems. Furthermore, the microcontroller supports various analog features, including ADC (Analog-to-Digital Converter) modules, which are essential for real-time signal processing and data acquisition.

In terms of power management, the MEGF60 is designed with energy efficiency in mind. Its low-power modes allow for prolonged battery life in portable devices, while its dynamic power scaling features optimize performance based on workload demands. This adaptability is crucial for applications where power consumption is a critical consideration.

Security is becoming increasingly important in today's connected environments. The MEGF60 integrates advanced security features such as hardware cryptographic engines and secure boot capabilities, providing a secure foundation for sensitive data and communication.

Overall, the Toshiba MEGF60 microcontroller stands out with its powerful processing capabilities, extensive memory options, diverse connectivity features, and robust security measures. It is an excellent choice for engineers looking to develop efficient and reliable embedded solutions across a wide range of applications. Whether for automotive systems, industrial automation, or consumer electronics, the MEGF60 delivers the performance and flexibility necessary to meet today’s challenges in embedded design.