Mitsubishi Electronics 164 Series Hdmi Control of an Hdmi A/V Receiver and Connected Devices, Vcr

HDMI Control of an HDMI A/V Receiver and Connected Devices

Note: Connect the A/V receiver to the TV with an HDMI cable before making other connections.

1.Enable HDMI Control for the A/V receiver as described in “Enabling HDMI Control of CEC Devices” on the previous page.

2.Power on the HDMI device you wish to connect to the A/V receiver (such as a disc player, cable box, or satellite receiver). Allow the device to complete the power-on sequence (boot up). Stop playback if the device starts playing.

3.Connect the device to the A/V receiver with an HDMI cable.

4.Select the device’s HDMI input on the A/V receiv- er’s front panel controls or remote control.

5.When the TV detects the connection, the New Device Found screen will appear.

Note: If the TV is unable to detect the device, either the device’s CEC capability is not enabled or the device is not CEC compatible. Enable HDMI control through the device’s menus before continuing. You may need to temporar- ily connect the device directly to the TV to view device menus.

6.Highlight On and press ENTER to add a check.

7.Highlight EXIT and press ENTER to close the New Device Found screen.

8.Optional: Connect the TV’s DIGITAL AUDIO OUTPUT to an input on the A/V receiver. Use this additional connection if:

•You want the ability to switch between the A/V receiver speakers and the TV speakers.

•You want to use the A/V receiver to listen to devices connected to the TV only, e.g., an antenna input or camcorder.

9.265 Series. If desired, perform NetCommand IR Learning to supplement CEC functions. You must first connect and place IR emitters for the devices. See page 60.

Connecting HDMI devices. The optional digital audio connection allows you to hear audio through the A/V receiver from devices connected to the TV only.