Mitsubishi Electronics 265 Series, 164 Series manual Source device connected directly to the TV

Source device connected directly to the TV

Remote Control Programming (Any Connection Type)

Program the remote control to operate the A/V device. To control the device, set the remote control to the correct mode for the device type. See Appendix A, “Pro- gramming the Remote Control.” In the case of an A/V receiver, use the Audio Lock feature, page 74.

Any Connection Type

A/V TV Device

265 Series. NetCommand IR Control (Any Connection Type)

Set up NetCommand IR control of the device’s keys as desired. See “IR Emitters,” page 61, and “Initial NetCommand Setup,” page 62.

Any Connection Type

A/V TV Device

CEC-Enabled HDMI A/V Receiver

The TV’s remote control may operate some functions of a connected A/V device. You can switch to the device by selecting its icon in the TV’s Input Selection menu. See Appendix C, “HDMI Control of CEC Devices,” page 81.

CEC-Enabled Source Device

A/V Receiver

TV

HDMI Cable

HDMI Cable

265 Series: A/V Receiver with HDMI Output (no CEC)

1.Set up NetCommand IR control of the A/V receiver’s keys as desired. See “IR Emitters,” page 61, and “Setting Up A/V Receiver Control,” page 68.

2.Set up NetCommand IR control of the source device’s keys as desired. See “NetCommand Control of a Device Connected to an HDMI A/V Receiver,” page 71.

Source

Device Any Con-

nection Type

A/V Receiver

HDMI

Cable

TV

Downloaded From TV-Manual.com Manuals

For assistance call 1(800) 332-2119