ETHERNET CONNECTION 628 638
The OEM628 and OEM638 receivers are equipped with a 10/100baseT Ethernet port that supports IPv4 Internet layer, TCP/IP transport, Telnet and ping. Through the port, remote debugging, accept MRTCA (modified RTCA) data and downloading firmware can be performed. OEM6 family receivers are also equipped with NTRIP Version 2.0 client and server capability.
Instructions on configuring Ethernet and NTRIP are in application note APN-057 at www.novatel.com/ support/search/items/Application%20Note. Also refer to the OEM6 Family Installation and Operation User Manual (OM-20000128) and the OEM6 Family Firmware Reference Manual (OM20000129).
POST PROCESSING
Post-mission data processing refers to case where GNSS data collected by the receiver is processed after the entire data collection session is complete.
OEM6 based output is compatible with post-processing software from NovAtel’s Waypoint® Products Group. For details, see www.novatel.com/Products/Waypoint Software.
DATA LOGGING
An extensive set of logs are available to capture data (refer to the OEM6 Family Firmware Reference Manual-OM20000129). Logs can be directed to any of the OEM6 family card’s communication ports and can be automatically generated when new or changed data becomes available or at regular intervals. Data can be collected through NovAtel Connect using the Logging Control Window.