The Solution Status is also indicated as computed in the Position window.
Entering Commands
Commands can be sent to the receiver with the Console window under View in the menu bar. Enter commands in the text box at the bottom of the Console window.
Note the following when entering commands:
•Logs can be requested in three formats: ASCII (e.g., log bestposa), Abbreviated ASCII (e.g., log bestpos) and Binary (e.g., log bestposb). Abbreviated ASCII is the best format to use when you want to work with the receiver directly. For data collection, use ASCII or Binary.
•Press ENTER to send the command string to the receiver. Commands are not case sensitive.
Refer to the OEM6 Family Firmware Reference Manual
ENABLING SBAS
All GPS capable models of OEM6 family cards are capable of SBAS positioning. This positioning mode is enabled using the SBASCONTROL command, as follows:
sbascontrol enable auto
Once enabled, the Solution type field shown in Connect’s Position window should change from Single to SBAS. SBAS satellites display in the Constellation window. OEM6 family cards track available SBAS satellites, including WAAS, EGNOS and other SBAS systems.
7