Novatel GM-14915095 quick start Dgps

Once the base and rover are set up, configure them for RTCA, RTCM, RTCMV3, CMR+ or CMR corrections. Below is an RTCA example (replace the latitude, longitude and height coordinates shown with those of the base):

Base
serialconfig com2 115200 n 8 1 n on
interfacemode com2 none	rtca off
fix position latitude longitude height		(enter your own lat, long and hgt values)
log com2 rtcaobs2 ontime 1
log com2 rtcaref ontime	10
log com2 rtca1 ontime 5	(DGPS)
Rover
interfacemode com2 rtca	none off

RT-2®is NovAtel’s proprietary Real-Time Kinematic (RTK) solution. Optimal RTK performance is achieved when both the base and rovers are NovAtel products, however, RT-2 will operate with equipment from other manufacturers when using RTCM and CMR messaging.

RT-2 is supported by GPS only and GPS+GLONASS OEM6 based models.

For more base/rover configurations, search the key words “rover base” at www.novatel.com/support/search/.

Refer to OEM6 Family Installation and Operation User Manual (OM-20000128) for additional information.

9