Loewe Accessories TV EPG button Enter dots Function of coloured buttons, Network Setting

Initial installation

Select IP address assignment method

56Select IP address and Subnet mask Assignment method,

adopt with OK.

Select IP Address Assignment Method

Automatic (DHCP)

Input Static IP Address OK

OK Activate

Automatic (DHCP): IP address and Subnet mask are automatically issued by a DHCP server on your home network.

➠A DHCP server has to be set up on a device on the network (e.g. WLAN router).

Input Static IP Address: IP address and Subnet mask are entered manually.

Set Device IP Address
IP Address		192.168.1.123_
OK	Adopt		Delete address	END
0 - 9	Input digits		Delete last position
EPG	Input “.“

Digit buttons: Input digits of IP address.

EPG button: Enter dots.

Function of coloured buttons:

Yellow: Delete last position.

Red: Delete address.

OK button: Adopt IP address.

➠Proceed in the same way with the subsequent entry of the Subnet mask.

Network Setting

Afterwards you will see a summary of the settings.			english
Press OK button to adopt settings.
backwards step by step for changes.
	Network Setting
	Adopt the following settings?
	Network mode:	Wireless
	SSID :	WLAN-Router_1
	IP address :	192.168.1.123
	Subnet mask :	255.255.255.0

OK Adopt

Select Server

In the last step you select the required media server on your home network.

Select Server
Media-Server	OK
OK Activate	Rescan

56Select server. Confirm with OK.

If your required media server should not be found the first time, then you can press the red button to Rescan for media servers.

After successful initial installation, the media overview opens up (page 8) and the Connectivity display on the left of the TV set lights up. The Connectivity display can, if required, be switched off via the MediaNetwork menu (page 9).

-