Sharp CD-BA2600, CD-BA250 Listening to the memorized station, „ Memorizing a station

Page 21

Listening to the memorized station

„Memorizing a station

You can store 40 AM and FM stations in memory and recall them at the push of a but- ton. (Preset tuning)

1 Perform the steps 1 - 3 in "Listening to the Radio" on page 20.

2 Press the MEMORY/SET button to enter the preset tuning saving mode.

3 Within 30 seconds, press the PRESET or PRESET button to select the preset channel number.

Store the stations in memory, in order, starting with preset channel 1.

4 Within 30 seconds, press the MEMORY/SET button to store that station in memory.

If the "MEMORY" and preset number indicators go out before the station is memorized, repeat the operation from step 2.

5 Repeat steps 1 - 4 to set other stations, or to change a preset sta- tion.

When a new station is stored in memory, the station previously memorized will be erased.

Note:

The backup function protects the memorized stations for a few hours should there be a power failure or the AC power cord disconnection.

„To recall a memorized station

Press the PRESET or PRESET button for less than 0.5 seconds to select the desired station.

Preset channel

Frequency and frequency band

This can be operated by pressing the PRESET ( or ) button on the remote control.

„To scan the preset stations

The stations saved in memory can be scanned automatically. (Preset memory scan)

1 Press the PRESET or PRESET button for more than 0.5 seconds.

zThe preset number will flash and the programmed stations will be tuned in se- quentially, for 5 seconds each.

zThis can be operated by pressing the PRESET ( or ) button on the remote control.

2 Press the PRESET or PRESET button again when the desired station is located.

„To erase entire preset memory

1Press the ON/STAND-BY button to enter the stand-by mode.

2Press the ON/STAND-BY button while holding down the TUNER (BAND) button and X-BASS/DEMO button until "TUNER CL" appears.

Radio - Listening to the memorized station -

Listening to the Radio (See page 20.)

21

00/12/4 CD-BA250(U)3.fm

Page 20 Page 22
Image 21
Page 20 Page 22
Contents CD-BA250 CD-BA2600 Special Notes Explanation of Graphical SymbolsImportant Instruction Special NotesSafeguards Important SafeguardsInstruction Only as recommended by the manufacturerAccessories Contents„ Volume control PrecautionsGeneral Information Precautions „ GeneralIndicators Controls and IndicatorsGeneral „ Front panel„ Rear panel 10 11 1414 „ DisplayBattery installation for remote control See 10 11 „ Remote controlCD Pause Button CD Clear Button„ Speaker system Placing the speaker systemLeft speaker Preparation for Use System Connections System ConnectionsFM antenna AC 120 V, 60 HzInstalling the AM loop antenna „ Connecting the AC power cord„ Speaker connection „ FM/AM loop antenna connection„ Battery installation Remote Control„ Test of the remote control Preparation for Use Remote ControlGeneral Control „ Demonstration mode„ Display brightness 2 levels Basic Operation General Control„ Bass control Sound Control„ Equalizer Basic Operation Sound ControlBasic Operation Setting the Clock Setting the ClockTo readjust the clock To confirm the time displayCD Playback Listening to a CD CDs Listening to a CD CDsPress the OPEN/CLOSE button to close the disc tray Sound Control See„ To locate the desired portion „ To locate the beginning of a trackRepeat or Random Play Starting playback with a desired track„ Repeat Play „ Random PlayPlayback Programmed PlayAdvanced CD PlayListening to the Radio Auto tuningRadio Listening to the Radio To receive an FM stereo transmission„ To erase entire preset memory „ To scan the preset stationsListening to the memorized station „ Memorizing a stationListening to a Cassette Tape Tape 1 or Tape Tape Playback Listening to a Cassette Tape Tape 1 or TapeFast forward/rewind Tape 2 only Tape Recording Recording from the Radio Recording from the RadioPress the REC Pause button To stop recordingTape Recording Recording from a CD CDs Recording from a CD CDsPress the / Tape 2 button to start recording To perform programmed recordingRecording Dubbing from Tape to TapeTape „ Erasing recorded tapesTimer and Sleep Operation „ Timer playback or Timer recordingAdvanced Features Timer and Sleep Operation „ Sleep operation „ Headphones Advanced FeaturesEnhancing Your System „ Listening to the playback sounds from VCR, DVD, etc„ Cassette deck Troubleshooting Chart„ CD player „ TunerReferences MaintenanceSpecifications Specifications„ Amplifier „ SpeakerSharp Corporation

CD-BA2600, CD-BA250 specifications

The Sharp CD-BA2600 and CD-BA250 are two dynamic audio systems designed to deliver exceptional sound quality and vibrant performances that cater to music enthusiasts. Both models showcase a blend of advanced technologies and practical features that make them stand out in the compact audio system category.

The CD-BA2600 boasts a powerful 260 watts total output, ensuring a robust sound experience suitable for various environments, from small gatherings to more extensive parties. It is engineered with a dual speaker configuration that enhances audio clarity and depth, providing a rich listening experience. The inclusion of a built-in equalizer allows users to tailor the audio output according to their preferences, ensuring optimal sound performance regardless of genre.

Meanwhile, the CD-BA250 offers a slightly toned-down output of 250 watts, making it an excellent choice for those looking for quality sound in a smaller package. The system features a sleek and modern design, making it a stylish addition to any home décor.

Both units come equipped with a CD player that supports a variety of formats, including CD-R and CD-RW, catering to users with different media collections. Additionally, the USB port present in both models allows for seamless playback from external devices. This feature is complemented by the digital FM tuner, providing access to numerous radio stations, which can be saved and easily recalled with preset functionalities.

One of the standout features of both systems is their Bluetooth connectivity. This allows users to stream music wirelessly from smartphones, tablets, or laptops, enhancing convenience and versatility. The inclusion of remote controls further adds to user-friendliness, allowing for easy operation from a distance.

In terms of design, both the CD-BA2600 and CD-BA250 have a compact footprint, making them suitable for various spaces, whether on a shelf or as part of a home entertainment setup. Their straightforward interface ensures that even those who may not be tech-savvy can operate them with ease.

In summary, the Sharp CD-BA2600 and CD-BA250 present a compelling choice for music lovers, combining potent audio technology with user-friendly features. Their distinct designs and functionalities cater to a wide range of preferences, making them valuable additions for anyone seeking an enhanced audio experience.
Top Page Image Contents