Sharp CD-BA2600, CD-BA250 operation manual „ Sleep operation

Page 27

6 Press the TUNING/TIME ( or ) button to specify the minute, then press the MEMORY/SET button.

7 The unit will enter the timer stand-by mode automatically.

To cancel the timer playback/timer recording:

Press the ON/STAND-BY button to turn the power on.

8 When the preset time is reached, playback or recording will start.

The volume will increase gradually until it reaches the volume you were listening at before your system enters the timer stand-by mode.

9 In timer playback:

If you select CD or TAPE, the unit will enter the stand-by mode after the play- back. If you select TUNER, it will enter the stand-by mode one hour after the tim- er playback starts.

In timer recording:

When the recording tape reaches its end, the timer recording will end, and the unit will enter the stand-by mode.

To reset or change the timer setting:

Perform "Timer playback or Timer recording" from the beginning.

Notes:

zOnce the time is set, the setting will be retained until a new time is entered.

zWhen performing timer playback or recording using another unit connected to the VIDEO/AUX jacks, select "VIDEO/AUX" in step 2.

At this time, only this unit will be turned on or enter the power stand-by mode auto- matically. It will enter the power stand-by mode when the end of the recording tape is reached in timer recording or 1 hour after the playback starts in timer playback. However, another unit will not be turned on or off.

„Sleep operation

1 Play back the desired sound source.

2 Press the TIMER/SLEEP button repeatedly until "SLEEP" is dis- played.

To change the sleep time:

While the sleep time is displayed, press the TUNING/TIME ( or ) button.

(Maximum: 3 hours - Minimum: 1 minute)

z3 hours - 5 minutes 5-minute intervals

z5 minutes - 1 minute 1-minute intervals

3 Press the MEMORY/SET button.

4 Your system will enter the power stand-by mode automatically af- ter the preset time has elapsed.

The volume will be turned down 1 minute before the sleep operation finishes.

To cancel the sleep operation:

Press the ON/STAND-BY button while the sleep timer is set.

To confirm the remaining sleep time:

Press the TIMER/SLEEP button while the sleep timer is set.

The remaining sleep time is displayed for about 5 seconds.

Note:

Once the sleep time is set, it will remain unchanged until the setting is changed.

Advanced Features - Timer and Sleep Operation -

Listening to the Radio (See page 20.)

00/12/4 CD-BA250(U)3.fm

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents CD-BA250 CD-BA2600 Special Notes Explanation of Graphical SymbolsSpecial Notes Important InstructionOnly as recommended by the manufacturer Important SafeguardsSafeguards InstructionAccessories Contents„ General Precautions„ Volume control General Information Precautions„ Front panel Controls and IndicatorsIndicators General„ Rear panel 10 11 1414 „ DisplayCD Clear Button 10 11 „ Remote controlBattery installation for remote control See CD Pause Button„ Speaker system Placing the speaker systemLeft speaker AC 120 V, 60 Hz System ConnectionsPreparation for Use System Connections FM antenna„ FM/AM loop antenna connection „ Connecting the AC power cordInstalling the AM loop antenna „ Speaker connectionPreparation for Use Remote Control Remote Control„ Battery installation „ Test of the remote controlBasic Operation General Control „ Demonstration modeGeneral Control „ Display brightness 2 levelsBasic Operation Sound Control Sound Control„ Bass control „ EqualizerTo confirm the time display Setting the ClockBasic Operation Setting the Clock To readjust the clockSound Control See Listening to a CD CDsCD Playback Listening to a CD CDs Press the OPEN/CLOSE button to close the disc tray„ To locate the desired portion „ To locate the beginning of a track„ Random Play Starting playback with a desired trackRepeat or Random Play „ Repeat PlayPlay Programmed PlayPlayback Advanced CDTo receive an FM stereo transmission Auto tuningListening to the Radio Radio Listening to the Radio„ Memorizing a station „ To scan the preset stations„ To erase entire preset memory Listening to the memorized stationListening to a Cassette Tape Tape 1 or Tape Tape Playback Listening to a Cassette Tape Tape 1 or TapeFast forward/rewind Tape 2 only To stop recording Recording from the RadioTape Recording Recording from the Radio Press the REC Pause buttonTo perform programmed recording Recording from a CD CDsTape Recording Recording from a CD CDs Press the / Tape 2 button to start recording„ Erasing recorded tapes Dubbing from Tape to TapeRecording TapeTimer and Sleep Operation „ Timer playback or Timer recordingAdvanced Features Timer and Sleep Operation „ Sleep operation „ Listening to the playback sounds from VCR, DVD, etc Advanced Features„ Headphones Enhancing Your System„ Tuner Troubleshooting Chart„ Cassette deck „ CD playerReferences Maintenance„ Speaker SpecificationsSpecifications „ AmplifierSharp Corporation

CD-BA2600, CD-BA250 specifications

The Sharp CD-BA2600 and CD-BA250 are two dynamic audio systems designed to deliver exceptional sound quality and vibrant performances that cater to music enthusiasts. Both models showcase a blend of advanced technologies and practical features that make them stand out in the compact audio system category.

The CD-BA2600 boasts a powerful 260 watts total output, ensuring a robust sound experience suitable for various environments, from small gatherings to more extensive parties. It is engineered with a dual speaker configuration that enhances audio clarity and depth, providing a rich listening experience. The inclusion of a built-in equalizer allows users to tailor the audio output according to their preferences, ensuring optimal sound performance regardless of genre.

Meanwhile, the CD-BA250 offers a slightly toned-down output of 250 watts, making it an excellent choice for those looking for quality sound in a smaller package. The system features a sleek and modern design, making it a stylish addition to any home décor.

Both units come equipped with a CD player that supports a variety of formats, including CD-R and CD-RW, catering to users with different media collections. Additionally, the USB port present in both models allows for seamless playback from external devices. This feature is complemented by the digital FM tuner, providing access to numerous radio stations, which can be saved and easily recalled with preset functionalities.

One of the standout features of both systems is their Bluetooth connectivity. This allows users to stream music wirelessly from smartphones, tablets, or laptops, enhancing convenience and versatility. The inclusion of remote controls further adds to user-friendliness, allowing for easy operation from a distance.

In terms of design, both the CD-BA2600 and CD-BA250 have a compact footprint, making them suitable for various spaces, whether on a shelf or as part of a home entertainment setup. Their straightforward interface ensures that even those who may not be tech-savvy can operate them with ease.

In summary, the Sharp CD-BA2600 and CD-BA250 present a compelling choice for music lovers, combining potent audio technology with user-friendly features. Their distinct designs and functionalities cater to a wide range of preferences, making them valuable additions for anyone seeking an enhanced audio experience.
Top Page Image Contents