Sharp CD-BA2600, CD-BA250 Tape Recording Recording from the Radio, Press the REC Pause button

Page 23

Recording from the Radio

Before recording:

zWhen recording important selections, make a preliminary test to ensure that the desired material is properly recorded.

zSHARP is not liable for damage or loss of your recording arising from malfunction of this unit.

zThe volume and sound controls can be adjusted with no effect on the recorded signal (Variable Sound Monitor).

zFor recording, use only normal tapes. Do not use metal or CrO tapes.

Recording can be operated in the TAPE 2 compartment. The TAPE 1 is for playback only.

1 Tune in to the desired station. (See page 20.)

2 Load a cassette into the TAPE 2 cassette compartment with the side to be recorded on facing you.

Wind past the leader of the tape, on which recording cannot be performed.

3 Press the REC PAUSE () button.

Recording will be paused.

4 Press the / button on the main unit or the TAPE 2 button on the remote control to start recording.

To interrupt recording:

Press the REC PAUSE () button.

To resume recording, press the / (TAPE 2 ) button.

To stop recording:

Press the (TAPE ) button.

Note:

If you hear a whistling noise while recording an AM station, move the AM loop antenna.

Erase-prevention tab of cassette tapes:

z

When recording on a cassette tape, make

Side A

 

 

sure that the erase-prevention tabs are not re-

 

 

moved. Cassettes have removable tabs that

 

 

prevent accidental recording or erasing.

Tab for side A

z

Tab for side B

To protect the recorded sound, remove the tab

 

 

after recording. Cover the tab hole with adhe-

 

sive tape to record on the tape without the tab.

Tape Recording - Recording from the Radio -

Listening to the Radio (See page 20.)

23

00/12/4 CD-BA250(U)3.fm

Page 22 Page 24
Image 23
Page 22 Page 24
Contents CD-BA250 CD-BA2600 Special Notes Explanation of Graphical SymbolsSpecial Notes Important InstructionOnly as recommended by the manufacturer Important SafeguardsSafeguards InstructionAccessories Contents„ General Precautions„ Volume control General Information Precautions„ Front panel Controls and IndicatorsIndicators General„ Rear panel 10 11 1414 „ DisplayCD Clear Button 10 11 „ Remote controlBattery installation for remote control See CD Pause ButtonLeft speaker „ Speaker systemPlacing the speaker system AC 120 V, 60 Hz System ConnectionsPreparation for Use System Connections FM antenna„ FM/AM loop antenna connection „ Connecting the AC power cordInstalling the AM loop antenna „ Speaker connectionPreparation for Use Remote Control Remote Control„ Battery installation „ Test of the remote controlBasic Operation General Control „ Demonstration modeGeneral Control „ Display brightness 2 levelsBasic Operation Sound Control Sound Control„ Bass control „ EqualizerTo confirm the time display Setting the ClockBasic Operation Setting the Clock To readjust the clockSound Control See Listening to a CD CDsCD Playback Listening to a CD CDs Press the OPEN/CLOSE button to close the disc tray„ To locate the desired portion „ To locate the beginning of a track„ Random Play Starting playback with a desired trackRepeat or Random Play „ Repeat PlayPlay Programmed PlayPlayback Advanced CDTo receive an FM stereo transmission Auto tuningListening to the Radio Radio Listening to the Radio„ Memorizing a station „ To scan the preset stations„ To erase entire preset memory Listening to the memorized stationFast forward/rewind Tape 2 only Listening to a Cassette Tape Tape 1 or TapeTape Playback Listening to a Cassette Tape Tape 1 or Tape To stop recording Recording from the RadioTape Recording Recording from the Radio Press the REC Pause buttonTo perform programmed recording Recording from a CD CDsTape Recording Recording from a CD CDs Press the / Tape 2 button to start recording„ Erasing recorded tapes Dubbing from Tape to TapeRecording TapeAdvanced Features Timer and Sleep Operation Timer and Sleep Operation„ Timer playback or Timer recording „ Sleep operation „ Listening to the playback sounds from VCR, DVD, etc Advanced Features„ Headphones Enhancing Your System„ Tuner Troubleshooting Chart„ Cassette deck „ CD playerReferences Maintenance„ Speaker SpecificationsSpecifications „ AmplifierSharp Corporation

CD-BA2600, CD-BA250 specifications

The Sharp CD-BA2600 and CD-BA250 are two dynamic audio systems designed to deliver exceptional sound quality and vibrant performances that cater to music enthusiasts. Both models showcase a blend of advanced technologies and practical features that make them stand out in the compact audio system category.

The CD-BA2600 boasts a powerful 260 watts total output, ensuring a robust sound experience suitable for various environments, from small gatherings to more extensive parties. It is engineered with a dual speaker configuration that enhances audio clarity and depth, providing a rich listening experience. The inclusion of a built-in equalizer allows users to tailor the audio output according to their preferences, ensuring optimal sound performance regardless of genre.

Meanwhile, the CD-BA250 offers a slightly toned-down output of 250 watts, making it an excellent choice for those looking for quality sound in a smaller package. The system features a sleek and modern design, making it a stylish addition to any home décor.

Both units come equipped with a CD player that supports a variety of formats, including CD-R and CD-RW, catering to users with different media collections. Additionally, the USB port present in both models allows for seamless playback from external devices. This feature is complemented by the digital FM tuner, providing access to numerous radio stations, which can be saved and easily recalled with preset functionalities.

One of the standout features of both systems is their Bluetooth connectivity. This allows users to stream music wirelessly from smartphones, tablets, or laptops, enhancing convenience and versatility. The inclusion of remote controls further adds to user-friendliness, allowing for easy operation from a distance.

In terms of design, both the CD-BA2600 and CD-BA250 have a compact footprint, making them suitable for various spaces, whether on a shelf or as part of a home entertainment setup. Their straightforward interface ensures that even those who may not be tech-savvy can operate them with ease.

In summary, the Sharp CD-BA2600 and CD-BA250 present a compelling choice for music lovers, combining potent audio technology with user-friendly features. Their distinct designs and functionalities cater to a wide range of preferences, making them valuable additions for anyone seeking an enhanced audio experience.
Top Page Image Contents