Insignia 40" LED TV
DVI (same as HDMI but requires an audio connection)
Note
You must use the HDMI 1/ARC/DVI jack to connect a cable or satellite box using DVI. If you use another HDMI jack, you will not hear sound from the TV speakers.
| Cable or |
Side of TV | satellite box |
On your TV |
|
HDMI cable with
HDMI cable | Audio cable |
connector | connector |
Audio cable
HDMI 1/ | PC/DVI |
ARC/DVI | AUDIO IN |
jack | jack |
Back of TV
1Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2Connect the incoming cable from the cable wall jack to the
3Connect an
4Connect the other end of the cable to the HDMI 1/ARC/DVI jack on the side of your TV.
5Connect an audio cable (not provided) to the PC/DVI AUDIO IN jack on the back of your TV and to the AUDIO OUT jacks on the cable or satellite box.
Note
When you connect the audio using the PC/DVI AUDIO IN jack, the audio output is analog.
6Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
7 Press INPUT to open the INPUT SOURCE list.
8 Press S or T to highlight HDMI 1, then press ENTER.
14 | www.insigniaproducts.com | |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|