Insignia NS-40D510MX15 manual Hiding channels, Select HDMI, Component, or AV, then

NS-40D510MX15_14-0757_MAN_V1_ENG.book Page 53 Friday, August 8, 2014 10:31 AM

NS-40D510MX15 Insignia 40" LED TV

C If you select Satellite Service, a message	Hiding channels
asks how you connected the satellite box to	You can hide channels in the channel list. When you
your TV:
	press CH or CH , your TV skips the hidden
	channels. You can still tune to a hidden channel by
	pressing the number buttons for the channel.
	1 Press MENU. The on-screen menu opens.
	2 Press W or X to highlight CHANNELS, then press
	T or ENTER. The CHANNELS menu opens.

• Select HDMI, Component, or AV, then

press ENTER if you connected a satellite box to your TV using one of these cables. Read the message, then press ENTER to close the wizard.

• Select Coaxial, then press ENTER if you	3 Press S or T to highlight Add/Skip Channels,
connected a satellite box to your TV using
a coaxial cable. Read the message, then	then press ENTER. The CHANNELS · ADD/SKIP
press ENTER to start the channel scan (VHF	CHANNELS screen opens.
channels only).
Note
You can press EXIT to stop the auto
channel search, but you will need to run
the auto channel search again to create a
channel list.

4 Press S T W or X to highlight the channel you want to hide, then press ENTER. The check mark disappears.

Notes

• If you highlight a channel in the list for two to four seconds, your TV displays the channel in the background.

• A channel with a check mark is not hidden. A channel with no check mark is hidden.

• If the list has more than one page, press S or T to scroll through the pages.

5 Press MENU to return to the previous menu, or press EXIT to close the menu.

www.insigniaproducts.com 53