Sound
Before you begin:
You must set Location to Home. L p. 30
Otherwise, personalized Picture and Sound settings will not be memorized after the Unit goes into Standby Mode.
1Press MENU and use H I to select Sound, then press OK.
Picture | Auto sound | Standard |
Sound | Equalizer |
|
Setup | DTS TruSurround | On |
Features | Auto volume leveling | Off |
Language | TV speakers | On |
USB | Digital output format | Multichannel |
| Primary MTS | Stereo |
|
|
|
2Use H I J K to select the item you want to adjust, then press OK.
| to select the desired setting, then press OK. | |||
| (Personal, Standard, Vivid, Sports, Movie, Music | |||
Auto sound | and News) |
|
| |
When you adjust the following settings | ||||
| (Equalizer, DTS TruSurround and Auto volume | |||
| leveling), Personal sound will be set | |||
| Automatically when Location is set to Home. | |||
Adjust the tonal quality for each frequency. |
|
| ||
| Cursor | I | Cursor | H |
Equalizer |
|
|
|
|
to adjust each level of tonal quality. | ||||
| Press BACK to go back to the previous menu. |
This selects Sound Modes for more spatial or Surround Sound reproduction.
DTS TruSurround | Off | to set DTS TruSurround™ to Off | |
On | to set DTS TruSurround™ to On | ||
|
This function keeps a constant loudness level between the TV commercials and the Programs.
| Off | to Remove the Auto volume |
| leveling | |
Auto volume |
| |
| to Reduce Volume Differences | |
leveling | On | |
| between the TV Commercials and | |
|
| the Programs |
You can select the Audio Output from the Unit’s speakers or not. If your amplifier is HDMI link function compatible and connected by an HDMI cable to this Unit, some sound operations such as volume up can be changed by using this Unit’s Remote Control.
22 .English
You can select Audio Output through a Digital Audio Output connector.
|
| to Output Multichannel Signals |
Digital output | Multichannel | (When the Audio of the Content |
format |
| is PCM, it will be Output in PCM |
| even if Multichannel is selected.) | |
|
| |
| PCM | to Output PCM format. |
You can set the Output mode as a default for the Sound mode (Analog TV only).
This setting is not interlocked when you change the Output mode by pressing SAP. Refer to Switching Audio Mode. L p. 17
| Stereo | to Output Stereo Audio |
Primary MTS | Mono | to Output Mono Audio |
| SAP | to Output Second Audio Program |
TV speakers
On | to Output Sound from the Unit’s | |
Speakers | ||
| ||
Off | No Output Sound from the Unit’s | |
Speakers | ||
| ||
| to Control Audio Output from | |
CEC Link | your connected | |
CEC) Compliant Devices with | ||
| VOL + / – by using this Unit's | |
| Remote Control. |
Continued on next page.