8 Information
Glossary
Analog TV (NTSC)
Acronym that stands for National Television Systems Committee and the name of Analog broadcasting standards.
Off the air Analog TV signals are no longer being sent by major broadcasting stations in the USA.
Aspect ratio
The width of a TV screen relative to its height. Conventional TVs are 4:3 (in other words, the TV screen is almost square); widescreen models are 16:9 (the TV screen is almost twice as wide as its height).
CEC (Consumer Electronics Control)
This allows you to operate the linked functions between our brand devices with CEC feature and this Unit. We Do Not guarantee 100% interoperability with other brands of CEC compliant devices.
Component Video
This is a Video signal format that conveys each of 3 principal colors of light (red, blue and green) through different signal lines. This allows the viewers to experience picture colors as original as it is. There are several signal formats, including Y / Pb / Pr and Y / Cb / Cr.
Dolby Digital
The system developed by Dolby Laboratories to compress Digital sound. It offers Stereo Sound (2ch) or
DTV (ATSC)
Abbreviation that stands for Advanced Television Systems Committee and the name of the Digital broadcasting standards.
E-sticker
HDMI (High-Definition Multimedia Interface)
Interface that supports All uncompressed, Digital Audio / Video formats including
HDTV (High Definition TV)
Ultimate Digital format that produces high resolution and high picture quality.
PIN code
A stored
SAP (Secondary Audio Program)
SDTV (Standard Definition TV)
35 .English
Maintenance
Cabinet Cleaning
●Wipe the front panel and other exterior surfaces of the Unit with a soft cloth.
●Never use a solvent or alcohol. Do Not spray insecticide liquid near the Unit. Such chemicals may cause damage and discoloration to the exposed surfaces.
Panel Cleaning
Wipe the panel of the Unit with a soft cloth. Before cleaning the panel, disconnect the AC Power Cord.
Servicing
Should your Unit become inoperative, Do Not try to correct the problem yourself. There are no user serviceable parts inside. Call our toll free customer support line found on the cover of this Owner’s Manual to locate an Authorized Service Center.
IR Signal Check
If the Remote Control is not working properly, you can use a Digital or Cell Phone Camera to see if it is sending out an infrared signal.
e.g.) With a Digital Camera:
Point the Digital Camera towards the
Remote Control infrared diode at the front
of the Remote Control. Press any key on the
Remote Control and look at the Camera Display. If an infrared pulsating light appears on the Display, the Remote Control is
sending out an IR signal.
Note: Some Cameras have an IR Filter and will not Display the IR signal.
Standard Digital format that is similar to the Analog TV picture quality.