Overview | Kramer Electronics TP-305A manual

Overview

3Overview

The TP-305AUXGA - Audio - RS-232 Line Receiver/DA receives a CAT 5 signal from a transmitter1 and distributes it to up to five other receivers (via CAT 5 cables). The TP-305Aalso decodes the CAT 5 signal and distributes it to a UXGA output, an analog audio output, a digital audio output and an RS-232 output.

The TP-305Aserves as a power center that can distribute power to both the transmitter and the connected receivers (see section 3.1).

In particular, the TP-305Afeatures:

•Resolution of up to UXGA

•UXGA output on a 15-pin HD computer graphics video connector

•Digital audio output (S/PDIF) on an RCA connector and an analog audio output on a 3.5mm mini jack

•A transmission range of up to 300ft (up to 100 meters) over STP cabling

•Changeable polarity of the encoded H and V Sync for video (UXGA)

•EQ. and LEVEL controls for the video (UXGA) output

To achieve the best performance:

•Use only good quality connection cables2 to avoid interference, deterioration in signal quality due to poor matching, and elevated noise levels (often associated with low quality cables).

•Avoid interference from neighboring electrical appliances that may adversely influence signal quality and position your Kramer TP-305Aaway from moisture, excessive sunlight and dust

1 For example, the Kramer TP-121, TP-123 or TP-45

2 Available from Kramer Electronics on our Web site at http://www.kramerelectronics.com