Kramer Electronics Your TP-305A Uxga Audio RS-232 Line Receiver/DA, Feature Function

Your TP-305A UXGA - Audio - RS-232 Line Receiver/DA

4Your TP-305A UXGA - Audio - RS-232 Line Receiver/DA

Figure 1 and Table 1 define the TP-305A:

Figure 1: TP-305AUXGA - Audio - RS-232 Line Receiver/DA

Table 1: TP-305AUXGA - Audio - RS-232 Line Receiver/DA Features

#	Feature		Function
1	POWER Switch		Illuminated switch for turning the unit ON or OFF
2	LINK LED		Lights when receiving a valid input signal
3	EQ.1 Trimmer		Adjusts2 the cable compensation (equalization) level for the
			UXGA output
4	LEVEL Trimmer		Adjusts2 the output signal level for the UXGA output
5	LINE IN RJ-45 Connector		Connect to the LINE OUT connector of a transmitter3
6	UXGA OUT 15-pin HD Connector		Connect to the video acceptor
7	LINE OUTPUT RJ-45 Connectors		Connect to4 the LINE IN RJ-45 connector on a receiver5 (from 1
			to 5)
8	AUDIO OUT	ANALOG 3.5mm	Connect to the stereo analog audio acceptor 1
		Mini Jack
9		S/PDIF RCA	Connect to the digital audio acceptor 1
		Connector
10	RS-232 G, Tx Terminal Block		Connect the connector (G and Tx) to control a device (see
			section 5.3)
11	Power Connector with Fuse		AC connector enabling power supply to the unit

1 Degradation and VGA/XGA signal loss can result from using long cables (due to the effects of stray capacitance, for example), sometimes leading to a loss of sharpness in high-resolution signals

2 Use a screwdriver to carefully rotate the trimmer, adjusting the appropriate level 3 The PINOUT is defined in Table 3 and Figure 5

4 Using UTP or STP cable with RJ-45 connectors at both ends (the PINOUT is defined in Table 3 and Figure 5)

5 For example, the Kramer TP-124 or TP-46

5