ENFORCER Three- and Four-Channel RF Receiver
Sample Applications:
Positive Power Source
Positive Power Output
Power for receiver
Negative Power Source
Negative Power Output
Power for receiver
Typical N.C. Application
—
+
E-941SA-1200
Electromagnetic Lock
Typical N.O. Application
—
+
SD-996C-NUQ
Electric Door Strike
N.C. Application with Independent Power Sources
| | DC Power | |
| COM | Source | |
| | |
| NC | | |
| NO | | |
| — | AC Power | E-941SA-1200 |
| + |
| Source | Electromagnetic Lock |
N.O. Application with Independent Power Sources
COM | DC Power | |
Source | |
NC | |
| |
NO | | SD-996C-NUQ |
| |
— | AC Power | Electric Door Strike |
+Source
Specifications:
| Model | | SK-910R3Q | | SK-910R3-4Q | SK-910R4Q | | SK-910R4-4Q | |
| Operating frequency | | 315MHz | | 433.92MHz | 315MHz | | 433.92MHz | |
| Number of channels | | 3 | | 3 | 4 | | 4 | |
| Memory capacity | | | | 15 transmitter button codes per channel | | |
| Operating voltage | | | | 11~24 VAC/VDC | | |
| Operating current | Standby | | | 12mA@12VDC | | |
| Active | | | 50mA@12VDC per channel | | |
| | | | | |
| Relay contact rating | | | Form C 10A@24VDC or 120VAC per channel | |
| Connectors | | Screw terminals, +, -, with NO/NC/COM per channel | |
| Dimensions | | | | 5.3”x3.9”x1.1” (135x100x27.5mm) | | |
| | | | | | | | | |
Compatible Transmitters:
| Operating frequency | 315MHz | 433.92MHz | |
| Fixed Code: 68 billion codes | SK-919 Series Fixed Code | SK-939 Series Fixed Code | |
| CODEBUMP™: 18 quintillion (1.8x1019) codes | SK-917 Series CODEBUMP | SK-937 Series CODEBUMP | |
| | | | |
WARRANTY This SECO-LARM product is warranted against defects in material and workmanship while used in normal service for a period of one (1) year from the date of sale to the original consumer customer.
SECO-LARM’s obligation is limited to the repair or replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM. This Warranty is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect, repair, or alteration, improper or abnormal usage, or faulty installation, or if for any other reason SECO -LARM determines that such equipment is not operating properly as a result of causes other than defects in material and workmanship. The sole obligation of SECO-LARM, and the purchaser’s exclusive remedy, shall be limited to replacement or repair only, at SECO-LARM’s option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential personal or property damages of any kind to the purchaser or anyone else.
NOTICE: The information and specifications printed in this manual are current at the time of publication. However, the SECO-LARM policy is one of continual development and improvement. For this reason,
SECO-LARM reserves the right to change specifications without notice. SECO-LARM is also not responsible for misprints or typographical errors.
Copyright © 2012 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced or copied, in whole or in part, without the written permission of SECO-LARM.
U.S.A., Inc. | | PITSW1 |
16842 Millikan Avenue, Irvine, CA 92606 | Website: www seco-larm.com |
Tel: 800-662-0800 / 949-261-2999 Fax: 949-261-7326 | E-mail: sales@seco-larm.com | MiSK-910R3Q_SK-910R4Q_1204.docx |
